HP ThinPro 5.0 - Administrator Guide

Table E-10 root > ConnectionType > xdmcp
Registry key Description
root/ConnectionType/xdmcp/authorizations/user/add Indicates whether the user has permission to add a new
connection of this type using the Control Center. Not
applicable to Smart Zero. Set to 1 to allow, 0 to deny access.
root/ConnectionType/xdmcp/authorizations/user/general Indicates whether the user has permission to modify the
general settings for this connection type using the Control
Center. Not applicable to Smart Zero. Set to 1 to allow, 0 to
deny access.
root/ConnectionType/xdmcp/connections/{UUID}/address The address of the remote host to connect to.
root/ConnectionType/xdmcp/connections/{UUID}/
afterStartedCommand
The full path to a script or binary to run after the connection
has been started.
root/ConnectionType/xdmcp/connections/{UUID}/
afterStoppedCommand
The full path to a script or binary to run after the connection
has finished.
root/ConnectionType/xdmcp/connections/{UUID}/
authorizations/user/edit
Indicates whether the user has permission to modify the
connection settings for this connection. Set to 1 to allow, 0 to
deny access.
NOTE: The connection can be edited in Administrator
Mode even when this key is set to 0.
root/ConnectionType/xdmcp/connections/{UUID}/
authorizations/user/execution
Indicates whether the user has permission to execute the
connection. Set to 1 to allow, 0 to deny access.
NOTE: The connection will always be available to launch in
Administrator Mode.
root/ConnectionType/xdmcp/connections/{UUID}/
autoReconnect
If set to 1, the system will attempt to automatically restart the
connection after it has been closed. If required, credentials
should be supplied though the zero-login/
defaultCredentials field. "autostart" is frequently used
in conjunction with this setting.
root/ConnectionType/xdmcp/connections/{UUID}/autostart If greater than 0, the system will attempt to automatically
start the connection when the client is booted. If required,
credentials should be supplied though the zero-login/
defaultCredentials field. "autoReconnect" is frequently
used in conjunction with this setting.
root/ConnectionType/xdmcp/connections/{UUID}/
beforeStartingCommand
The full path to a script or binary to run before the connection
has started.
root/ConnectionType/xdmcp/connections/{UUID}/color The color depth for the GUI or display of the connection.
root/ConnectionType/xdmcp/connections/{UUID}/
connectionEndAction
This key does not have a function.
root/ConnectionType/xdmcp/connections/{UUID}/coord The connection’s window position.
root/ConnectionType/xdmcp/connections/{UUID}/
dependConnectionId
This key does not have a function.
root/ConnectionType/xdmcp/connections/{UUID}/
extraEnvValues/{UUID}/key
The key for the extraEnv value of the connection.
root/ConnectionType/xdmcp/connections/{UUID}/
extraEnvValues/{UUID}/value
The value corresponding to the key for the extraEnv of the
connection.
root/ConnectionType/xdmcp/connections/{UUID}/
fallBackConnection
When set to the UUID of another available connection, that
connection will be autostarted if the current connection fails
or experiences an error and fails to start. The UUID of the
root > ConnectionType 109