HP ThinPro 5.0 - Administrator Guide

Table E-14 root > Network (continued)
Registry key Description
root/Network/IPSec/IPSecRules/{UUID}/MMIntegrityAlg Phase 1 integrity algorithm.
root/Network/IPSec/IPSecRules/{UUID}/MMLifetimeMinutes Phase 1 lifetime.
root/Network/IPSec/IPSecRules/{UUID}/QMAHEnable Enables Phase 2 AH.
root/Network/IPSec/IPSecRules/{UUID}/QMAHIntegrityAlg Phase 2 AH integrity algorithm.
root/Network/IPSec/IPSecRules/{UUID}/QMESPEnable Enables Phase 2 ESP.
root/Network/IPSec/IPSecRules/{UUID}/
QMESPEncryptionAlg
Phase 2 ESP encryption algorithm.
root/Network/IPSec/IPSecRules/{UUID}/QMESPIntegrityAlg Phase 2 ESP integrity algorithm.
root/Network/IPSec/IPSecRules/{UUID}/QMLifetimeSeconds Phase 2 lifetime.
root/Network/IPSec/IPSecRules/{UUID}/RuleDescription Description for the IPsec rule, such as purpose for creating
the rule.
root/Network/IPSec/IPSecRules/{UUID}/RuleEnable Rule enable or disable flag. When set to 1 the rule will be
enabled. Set to 0 to disable the rule.
root/Network/IPSec/IPSecRules/{UUID}/RuleName Name of the IPsec rule.
root/Network/IPSec/IPSecRules/{UUID}/SrcAddr Source address for the IPsec rule.
root/Network/IPSec/IPSecRules/{UUID}/TunnelDstAddr Tunnel destination address for the IPsec rule.
root/Network/IPSec/IPSecRules/{UUID}/TunnelEnable Enables tunnel setting for the IPsec rule. When enabled, the
rule is 'apply to tunnel mode'.
root/Network/IPSec/IPSecRules/{UUID}/TunnelSrcAddr Tunnel source address for the IPsec rule.
root/Network/SearchDomains Additional search domains for FQDN resolution can be
specified here. The specified domains will be appended to
any incomplete server definitions in an attempt to generate
an FQDN that can be resolved through DNS. For example, a
search domain of 'mydomain.com', will allow the server
definition 'myserver' to resolve properly to
'myserver.mydomain.com' even if the DNS server does not
have 'myserver' in its name resolution tables. Up to five
additional search domains can be specified.
root/Network/VPN/AutoStart Auto-starts VPN on system boot.
root/Network/VPN/Domain VPN domain.
root/Network/VPN/Gateway VPN gateway.
root/Network/VPN/Group VPN group.
root/Network/VPN/GroupPassword VPN group password.
root/Network/VPN/Password VPN user password.
root/Network/VPN/Type VPN type.
root/Network/VPN/Username VPN user name.
root/Network/VPN/VpncSecurity VPNC security level.
root/Network/Wired/DefaultGateway The default gateway the device will use to communicate to
the internet. Typically, this is the address of the router.
root > Network 127