HP ThinPro 5.0 - Administrator Guide

Table E-14 root > Network (continued)
Registry key Description
component is not detected. If set to 2, HP Velocity is in
monitor mode and only monitors network status.
root/Network/userLock If set to 1 and the display settings have been modified by the
user, then the display settings are preserved and the profile’s
settings are discarded.
root/Network/userLockEngaged Flag set to 1 after a user modification. If set to 1 as well as
userLock, then the display settings are preserved and the
profiles settings are discarded. This key should not need to
be modified.
root > SCIM
This section describes the registry keys, functions, options, and descriptions in the root > SCIM
folder.
Table E-15 root > SCIM
Registry key Description
root/SCIM/ScimEnabled If set to 1, SCIM is enabled for CJK input.
NOTE: This key is available only if the East Asia languages
client kit is installed.
root > Serial
This section describes the registry keys, functions, options, and descriptions in the root > Serial
folder.
Table E-16 root > Serial
Registry key Description
root/Serial/{UUID}/baud The speed of the serial device.
root/Serial/{UUID}/dataBits Indicates how many bits are in each character of the data
bits of the serial device.
root/Serial/{UUID}/device The serial device attached to the system.
root/Serial/{UUID}/flow The flow control of the serial device, which communicates
the starts and stops of the serial communication.
root/Serial/{UUID}/name The Windows device port used for communicating with the
serial device.
root/Serial/{UUID}/parity The parity bit of the serial device, which is used for error
detection. If set to none, there is no parity detection.
130 Appendix E Registry keys