HP ThinPro 5.0 - Administrator Guide

Table E-19 root > USB (continued)
Registry key Description
root/USB/Classes/Smart Card/ClassID USB class ID number.
root/USB/Classes/Smart Card/DisplayName USB class name.
root/USB/Classes/Smart Card/State Whether this class is mapped to the remote computer.
root/USB/Classes/Smart Card/Visible Indicates whether the class is shown on the UI, not shown on
the UI, or disabled.
root/USB/Classes/Vendor Specific Class/ClassID USB class ID number.
root/USB/Classes/Vendor Specific Class/DisplayName USB class name.
root/USB/Classes/Vendor Specific Class/State Whether this class is mapped to the remote computer.
root/USB/Classes/Vendor Specific Class/Visible Indicates whether the class is shown on the UI, not shown on
the UI, or disabled.
root/USB/Classes/Video/ClassID USB class ID number.
root/USB/Classes/Video/DisplayName USB class name.
root/USB/Classes/Video/State Whether this class is mapped to the remote computer.
root/USB/Classes/Video/Visible Indicates whether the class is shown on the UI, not shown on
the UI, or disabled.
root/USB/Classes/Wireless/ClassID USB class ID number.
root/USB/Classes/Wireless/DisplayName USB class name.
root/USB/Classes/Wireless/State Whether this class is mapped to the remote computer.
root/USB/Classes/Wirelss/Visible Indicates whether the class is shown on the UI, not shown on
the UI, or disabled.
root/USB/Devices/{UUID}/DisplayName The name that shows in the USB Manager UI. If not
supplied, the USB Manager attempts to generate an
appropriate name using device information.
root/USB/Devices/{UUID}/ProductID Product ID of the device.
root/USB/Devices/{UUID}/State Whether this class is mapped to the remote computer. If 0,
does not redirect. If 1, uses defaults. If 2, redirects.
root/USB/Devices/{UUID}/VendorID Vendor ID of the device.
root/USB/root/holdProtocolStatic If set to 1, does not switch the remote USB protocol based
on which value is chosen. Always leave it at the value in root/
protocol.
root/USB/root/mass-storage/allowed If set to 1, mass storage devices will be auto-mounted when
the protocol is "local".
root/USB/root/mass-storage/read-only If set to 1, when mass storage devices are auto-mounted
locally, they will be mounted read-only.
root/USB/root/opendebug If set to 1, a debug message writes to /tmp/USB-mgr-log.
root/USB/root/protocol Keeps track of the current owner of the remote USB. Used
internally only.
134 Appendix E Registry keys