HP ThinPro 5.0 - Administrator Guide

Table E-31 root > time (continued)
Registry key Description
identifies this server on its own; however, a specific server IP
address can be provided here if desired.
root/time/WebServerURL Specifies the web server URL. This server is queried using
the http protocol to fetch the time. This URL can be within the
intranet or over the internet.
root/time/timezone Used to manually specify the timezone. Timezones should
be specified in the following format: '[region]/[subregion]' as
defined by 'Linux timezone:' in the client date and time
control panel menu item.
root/time/use24HourFormat Choose according to locale:
0—AM/PM format
1—24-hour format
root/time/useDHCPTimezone If set to 1, clients will attempt to set the timezone through
DHCP. To properly set the timezone through this key, make
sure that the DHCP server for the clients forwards the 'tcode'
DHCP tag (usually tag 101, though 100 and 2 can work).
root/time/useNTPServers Set to 1 to enable the use of NTP time servers to
synchronize the client clock. If this is enabled, make sure an
NTP server is specified via DHCP or the 'NTPServers' key.
root > touchscreen
This section describes the registry keys, functions, options, and descriptions in the root > touchscreen
folder.
Table E-32 root > touchscreen
Registry key Description
root/touchscreen/calibrated This key is reserved for use.
root/touchscreen/enabled Set to 1 to enable the touchscreen module in the system.
root/touchscreen/maxx This key is reserved for use.
root/touchscreen/maxy This key is reserved for use.
root/touchscreen/minx This key is reserved for use.
root/touchscreen/miny This key is reserved for use.
root/touchscreen/port The device port to connect to the touchscreen.
root/touchscreen/swapx This key is reserved for use.
root/touchscreen/swapy This key is reserved for use.
root/touchscreen/type The controller type for the touchscreen.
142 Appendix E Registry keys