HP ThinPro 5.0 - Administrator Guide

Table E-35 root > users (continued)
Registry key Description
root/users/user/kioskMode
root/users/user/launchConnectionManager Enables the launch of the connection manager at startup.
root/users/user/rightclick Enables the right-click menu for the desktop.
root/users/user/ssoconnectiontype
root/users/user/switchAdmin Allows the user to switch to Admin Mode.
root/users/user/xhosts/{UUID}/xhost The XHost address/name in the XHost access control list.
root > vncserver
This section describes the registry keys, functions, options, and descriptions in the root > vncserver
folder.
Table E-36 root > vncserver
Registry key Description
root/vncserver/coreSettings/enableVncShadow Set to 1 to enable the VNC Shadow server for the thin client.
root/vncserver/coreSettings/userNotificationMessage The notification message that is shown to the user.
root/vncserver/coreSettings/vncNotifyShowTimeout Set to 1 to set a timeout on the notification message.
root/vncserver/coreSettings/vncNotifyTimeout The notification message that is shown if
vncNotifyShowTimeout is enabled. After the timeout, the
message is hidden.
root/vncserver/coreSettings/vncNotifyUser Set to 1 to enable a notification message when a VNC client
attempts to connect to the thin client.
root/vncserver/coreSettings/vncPassword The password for VNC if vncUsePassword is enabled.
root/vncserver/coreSettings/vncReadOnly Set to 1 to restrict VNC to view-only mode. VNC clients can
only watch.
root/vncserver/coreSettings/vncRefuseInDefault Set to 1 to refuse the connection if the user does not accept
or deny the notification message. Set to 0 to accept the
connection if the user does not accept or deny the
notification message.
root/vncserver/coreSettings/vncTakeEffectRightNow Set to 1 to cause VNC setting to take effect immediately.
root/vncserver/coreSettings/vncUsePassword Set to 1 to cause VNC to use a password to authenticate
client access.
root/vncserver/coreSettings/vncUseSSL Controls whether SSL is used for the VNC connection. The
default is 0.
root/vncserver/gui/VNCShadowManager/name The name of the settings editor for this application. This key
should not need to be modified.
root/vncserver/gui/VNCShadowManager/status The active status of the settings editor for this application.
This key should not need to be modified.
root/vncserver/gui/VNCShadowManager/title The window title of the settings editor for this application.
This key should not need to be modified.
146 Appendix E Registry keys