HP ThinPro 5.0 - Administrator Guide

●
root > sshd
●
root > time
●
root > touchscreen
●
root > translation
●
root > usb-update
●
root > users
●
root > vncserver
root > Audio
This section describes the registry keys, functions, options, and descriptions in the root > Audio
folder.
Table E-1 root > Audio
Registry key Description
root/Audio/AdjustSoundPath Indicates the full path to the default sound played when the
playback volume is changed through the audio mixer control
panel or systray. By default, this is a three-chord ding.
root/Audio/OutputMute 1—Mute the internal speaker and headphone jack.
0—Do not mute the internal speaker and headphone jack.
root/Audio/OutputScale Indicates the volume scale setting (1–400) for the internal
speaker and headphone jack.
root/Audio/OutputScaleAuto When set to 1 (auto mode), OutputScale is set to 130 on the
t610 and t610 PLUS, set to 63 on the t5565 and t510, and
set to 100 for all other hardware.
1—Sets OutputScale value on basis of hardware type.
0—Does not set OutputScale value on basis of hardware
type.
root/Audio/OutputVolume Indicates the volume setting for the internal speaker and
headphone jack, scaling from 1 to 100.
root/Audio/PlaybackDevice Indicates the device to use for playback.
1 is the internal audio controller.
2 and 3 are for additional devices, such as a USB headset.
root/Audio/RecordDevice Indicates the device to use for capture.
0 is automatic.
1 is the internal audio controller.
2 and 3 are for additional devices, such as a USB headset.
root/Audio/RecordMute 1—Mute the microphone jack.
0—Do not mute the microphone jack.
root/Audio/RecordScale Indicates the volume scale setting (1–400) for the
microphone jack.
root/Audio/RecordScaleAuto When set to 1 (auto mode), RecordScale is set to 100.
root > Audio 77