HP ThinPro 5.0 - Administrator Guide

Table E-1 root > Audio (continued)
Registry key Description
1—Sets RecordScale value on basis of hardware type.
0—Does not set RecordScale value on basis of hardware
type.
root/Audio/RecordVolume Indicates the volume setting for the microphone jack, scaling
from 1 to 100.
root/Audio/VisibleInSystray Indicates whether a speaker icon is visible in the system tray.
0—Icon is not visible
1—Icon is visible
root > CertMgr
This registry category is used internally and does not have any user-defined entries.
root > ConnectionManager
This section describes the registry keys, functions, options, and descriptions in the root >
ConnectionManager folder.
Table E-2 root > ConnectionManager
Registry key Description
root/ConnectionManager/customLogoPath
root/ConnectionManager/defaultConnection This must be set to a valid connection using the format
'[type]:[label]' to properly launch a connection at startup.
For example, 'xen:Default Connection'.
root/ConnectionManager/minHeight The default is 260.
root/ConnectionManager/minWidth The default is 400.
root/ConnectionManager/splashLogoPath Indicates the full path to the default image displayed while a
connection is loading.
This is the splash screen that will be seen after clicking
Connect on the HP ThinPro control panel.
root/ConnectionManager/useKioskMode
root/ConnectionManager/useSplashOnConnectionStartup By default, this is disabled for Smart Zero and enabled for
ThinPro.
Set to '1' to enable the splash screen image specified by
'splashLogoPath' on connection startup.
root > ConnectionType
This section describes the registry keys, functions, options, and descriptions in the root >
ConnectionType folders as follows.
78 Appendix E Registry keys