HP ThinPro 5.0 - Administrator Guide

root > ConnectionType > custom
This section describes the registry keys and functions in the root > ConnectionType > custom folder.
Table E-3 root > ConnectionType > custom
Registry key Description
root/ConnectionType/custom/authorizations/user/add Indicates whether the user has permission to add a new
connection of this type using the Control Center. Not
applicable to Smart Zero. Set to 1 to allow, 0 to deny access.
root/ConnectionType/custom/authorizations/user/general Indicates whether the user has permission to modify the
general settings for this connection type using the Control
Center. Not applicable to Smart Zero. Set to 1 to allow, 0 to
deny access.
root/ConnectionType/custom/connections/{UUID}/
afterStartedCommand
The full path to a script or binary to run after the connection
has been started.
root/ConnectionType/custom/connections/{UUID}/
afterStoppedCommand
The full path to a script or binary to run after the connection
has finished.
root/ConnectionType/custom/connections/{UUID}/
authorizations/user/edit
Indicates whether the user has permission to modify the
connection settings for this connection. Set to 1 to allow, 0 to
deny access.
NOTE: The connection can be edited in Administrator
Mode even when this key is set to 0.
root/ConnectionType/custom/connections/{UUID}/
authorizations/user/execution
Indicates whether the user has permission to execute the
connection. Set to 1 to allow, 0 to deny access.
NOTE: The connection will always be available to launch in
Administrator Mode.
root/ConnectionType/custom/connections/{UUID}/
autoReconnect
When set to 1, the connection will be restarted when it is
closed or disconnected. This is frequently useful for kiosk
style applications. When set to 0, the connection will not
restart when closed or disconnected.
root/ConnectionType/custom/connections/{UUID}/
autoReconnectDelay
Indicates the amount of time in seconds to wait before
restarting the connection. The default of 0 will cause the
connection to restart immediately upon close or disconnect.
This setting takes effect only when 'autoReconnect' is set to
1.
root/ConnectionType/custom/connections/{UUID}/autostart When set to 1, the connection will be automatically started
on boot. This is useful for kiosk style applications. By default,
connections are not automatically started.
root/ConnectionType/custom/connections/{UUID}/
autostartDelay
Indicates the amount of time in seconds to wait before
starting the connection on boot. The default of 0 will cause
the connection to start immediately upon boot. This setting
takes effect only when 'autostart' is set to 1.
root/ConnectionType/custom/connections/{UUID}/
beforeStartingCommand
Indicates the command to execute before the connection
starts.
root/ConnectionType/custom/connections/{UUID}/command Indicates
the real command for the custom connection to
execute.
root/ConnectionType/custom/connections/{UUID}/
connectionEndAction
This key is reserved for use.
root/ConnectionType/custom/connections/{UUID}/coord This key is reserved for use.
root > ConnectionType 79