HP ThinPro 5.0 - Administrator Guide

Table E-5 root > ConnectionType > freerdp (continued)
Registry key Description
root/ConnectionType/freerdp/connections/{UUID}/ExtraArgs Specify extra arguments to the xfreerdp client. Run ‘xfreerdp
—help’ from a terminal to see all available arguments.
root/ConnectionType/freerdp/connections/{UUID}/
SingleSignOn
root/ConnectionType/freerdp/connections/{UUID}/address The IP or hostname of the remote host to connect to.
root/ConnectionType/freerdp/connections/{UUID}/application Specifies an alternate shell to use. It can also be the name of
an available application.
root/ConnectionType/freerdp/connections/{UUID}/
attachToConsole
root/ConnectionType/freerdp/connections/{UUID}/
audioLatency
The average milliseconds of offset between the audio stream
and the display of corresponding video frames after
decoding.
root/ConnectionType/freerdp/connections/{UUID}/
authorizations/user/edit
Indicates whether the user has permission to modify the
connection settings for this connection. Set to 1 to allow, 0 to
deny access.
NOTE: The connection can be edited in Administrator
Mode even when this key is set to 0.
root/ConnectionType/freerdp/connections/{UUID}/
authorizations/user/execution
Indicates whether the user has permission to execute the
connection. Set to 1 to allow, 0 to deny access.
NOTE: The connection will always be available to launch in
Administrator Mode.
root/ConnectionType/freerdp/connections/{UUID}/
autoReconnect
When set to 1, the connection will be restarted when it is
closed or disconnected. This is frequently useful for kiosk
style applications. When set to 0, the connection will not
restart when closed or disconnected.
root/ConnectionType/freerdp/connections/{UUID}/
autoReconnectDelay
Indicates the amount of time in seconds to wait before
restarting the connection. The default of 0 will cause the
connection to restart immediately upon close or disconnect.
This setting takes effect only when 'autoReconnect' is set to
1.
root/ConnectionType/freerdp/connections/{UUID}/autostart When set to 1, the connection will be automatically started
on boot. This is useful for kiosk style applications. By default,
connections are not automatically started.
root/ConnectionType/freerdp/connections/{UUID}/
autostartDelay
Indicates the amount of time in seconds to wait before
starting the connection on boot. The default of 0 will cause
the connection to start immediately upon boot. This setting
takes effect only when 'autostart' is set to 1.
root/ConnectionType/freerdp/connections/{UUID}/
certificateCheck
When set to the default of 1, certificates are checked. When
set to 0, certificates are ignored.
root/ConnectionType/freerdp/connections/{UUID}/
clipboardExtension
When set to the default of 0
, inter-session RDP clipboard
functionality is disabled. When set to 1, the clipboard is
enabled between both RDP sessions and RDP sessions and
the local system.
root/ConnectionType/freerdp/connections/{UUID}/
compression
If set to 1, compression of RDP data between client and
server will be enabled. Setting to '0' will disable compression.
Compression is enabled by default.
86 Appendix E Registry keys