HP ThinPro 5.1 - Administrator Guide

Table E-5 root > ConnectionType > freerdp (continued)
Registry key Description
root/ConnectionType/freerdp/connections/
<UUID>/remoteApp
Sets the name of an available application to run in Remote
Application Integrated Locally (RAIL) mode.
root/ConnectionType/freerdp/connections/
<UUID>/remoteFx
If set to 1, RemoteFX is used if available.
root/ConnectionType/freerdp/connections/
<UUID>/seamlessWindow
If set to 1, window decorations are disabled. This can be
desirable in a multi-monitor configuration to allow the
connection to be set to the size of the primary monitor.
root/ConnectionType/freerdp/connections/
<UUID>/securityLevel
Sets the certificate security level. If set to 0, all connections
are allowed. If set to 1, remembered hosts are checked and
a warning dialog is shown if verification is not passed. If set
to 2, remembered hosts are not checked and a warning
dialog is shown if verification is not passed. If set to 3, all
insecure connections are refused.
root/ConnectionType/freerdp/connections/
<UUID>/sendHostname
Sets the client hostname that is sent to the remote host. If
left blank, the system hostname is sent. The registry key
root/ConnectionType/freerdp/general/
sendHostname must be set to hostname for this key to be
used.
root/ConnectionType/freerdp/connections/
<UUID>/smartcard
If set to 1, local smartcard authentication to the remote host
is allowed. Currently, this will disable Network Level
Authentication (NLA).
root/ConnectionType/freerdp/connections/
<UUID>/sound
If set to 1, the playback and recording devices are redirected
to the remote host via the Audio extension. If set to 0, the
extension is disabled. If set to 2, the USB audio devices are
redirected as configured in the USB Manager. Generally, HP
recommends setting this value to 1 so that high-level audio
redirection is used. This will improve audio quality and
ensure that client audio redirected via other extensions (such
as Multimedia Redirection) matches local audio
settings.
root/ConnectionType/freerdp/connections/
<UUID>/startMode
If set to the default focus and the connection is already
started, the connection will be given focus. Otherwise, an
error will be returned stating that the connection is already
started.
root/ConnectionType/freerdp/connections/
<UUID>/timeoutError
Sets the number of milliseconds to wait after losing the
connection before giving up on reconnecting with the server.
If set to 0, reconnection is attempted forever.
root/ConnectionType/freerdp/connections/
<UUID>/timeoutRecovery
Sets the number of milliseconds to wait after losing the
connection for networking to recover without trying a forced
reconnect.
root/ConnectionType/freerdp/connections/
<UUID>/timeoutWarning
Sets the number of milliseconds to wait after losing the
connection before warning the user that the connection has
been lost.
root/ConnectionType/freerdp/connections/
<UUID>/timeoutWarningDialog
If set to 1, when an end-to-end connection drop is detected,
a dialog is displayed and the screen will turn grayscale.
Otherwise, messages are written to the connection log and
the session freezes.
root/ConnectionType/freerdp/connections/
<UUID>/timeoutsEnabled
If set to 1, end-to-end connection health checks are done.
root > ConnectionType 93