HP ThinPro 5.1 - Administrator Guide

Table E-5 root > ConnectionType > freerdp (continued)
Registry key Description
root/ConnectionType/freerdp/general/
sendHostname
If set to hostname, the system hostname is sent to the
remote host. This is typically used to identify the client
machine associated with a particular RDP session. The sent
hostname can be overridden using sendHostname in the
connection-specific settings. If set to mac, the MAC address
of the first available network adapter is sent instead of the
hostname.
root/ConnectionType/freerdp/general/
serialPortsDriver
This setting ensures a better compatibility with the expected
underlying Windows driver SerCx2.sys, SerCx.sys, or
Serial.sys.
root/ConnectionType/freerdp/general/
serialPortsPermissive
If set to 1, errors for unsupported features will be ignored.
root > ConnectionType > ssh
Table E-6 root > ConnectionType > ssh
Registry key Description
root/ConnectionType/ssh/authorizations/user/
add
If set to 1, a standard user has permission to add a new
connection of this type using the Connection Manager. This
key has no effect on Smart Zero.
root/ConnectionType/ssh/authorizations/user/
general
If set to 1, a standard user has permission to modify the
general settings for this connection type using the
Connection Manager. This key has no effect on Smart Zero.
root/ConnectionType/ssh/connections/<UUID>/
address
Sets the hostname or IP address to connect to.
root/ConnectionType/ssh/connections/<UUID>/
afterStartedCommand
Sets the command to execute after the connection has been
started.
root/ConnectionType/ssh/connections/<UUID>/
afterStoppedCommand
Sets the command to execute after the connection has been
stopped.
root/ConnectionType/ssh/connections/<UUID>/
application
Specifies the application to run.
root/ConnectionType/ssh/connections/<UUID>/
authorizations/user/edit
If set to 1, a standard user has permission to modify the
connection settings for this connection.
root/ConnectionType/ssh/connections/<UUID>/
authorizations/user/execution
If set to 1, a standard user has permission to execute this
connection.
root/ConnectionType/ssh/connections/<UUID>/
autoReconnect
If set to 1, the connection will be restarted when it is closed
or disconnected.
root/ConnectionType/ssh/connections/<UUID>/
autoReconnectDelay
Sets the amount of time in seconds to wait before
reconnecting the session. The default of 0 will cause the
connection to reconnect immediately. This setting only takes
effect when autoReconnect is set to 1.
root/ConnectionType/ssh/connections/<UUID>/
autostart
If set to a value of 1–5, the connection will be started
automatically after the system boots, with the value of 1
having the highest priority.
root/ConnectionType/ssh/connections/<UUID>/
autostartDelay
Sets the amount of time in seconds to wait before starting
the connection after the system boots. The default of 0 will
96 Appendix E Registry keys