HP ThinPro 5.1 - Administrator Guide

Table E-6 root > ConnectionType > ssh (continued)
Registry key Description
root/ConnectionType/ssh/connections/<UUID>/
waitForNetwork
If set to 1, the connection will not be launched until
networking is available. This ensures that, on a slow
network, the connection does not launch before networking
is available, which could cause a failure.
root/ConnectionType/ssh/connections/<UUID>/
x11
If set to 1, the X11 connection forwarding option is enabled
for the connection.
root/ConnectionType/ssh/coreSettings/appName
Sets the internal application name to use for this connection
type. This key should not need to be modified.
root/ConnectionType/ssh/coreSettings/
className
Sets the internal application class name to use for this
connection type. This key should not need to be modified.
root/ConnectionType/ssh/coreSettings/editor
Sets the internal application name to use when the
Connection Manager is launched for this connection type.
This key should not need to be modified.
root/ConnectionType/ssh/coreSettings/
icon16Path
Sets the path to the 16x16 pixel icon for this application.
root/ConnectionType/ssh/coreSettings/
icon32Path
Sets the path to the 32x32 pixel icon for this application.
root/ConnectionType/ssh/coreSettings/
icon48Path
Sets the path to the 48x48 pixel icon for this application.
root/ConnectionType/ssh/coreSettings/label
Sets the name to display for this connection type in the UI.
root/ConnectionType/ssh/coreSettings/
priorityInConnectionLists
Sets the priority of this connection type when it is displayed
in the Connection Manager and the Configuration Wizard
that displays during initial setup. A higher value will move the
connection type towards the top of the list. If set to 0, the
connection type is hidden from Configuration Wizard and is
shown last in Connection Manager. Connections types with
the same priority are listed in alphabetical order.
root/ConnectionType/ssh/coreSettings/
serverRequired
Sets whether a server name or address is unused,
optional, or required for this connection type.
root/ConnectionType/ssh/coreSettings/
stopProcess
Sets the behavior that should occur when connection-
mgr stop is called on this connection. By default this is
close, which will send a standard kill signal to the process.
When set to kill, the process specified by appName will be
forcefully killed. When set to custom, a custom execution
script specified by wrapperScript will be executed with
the argument stop to terminate the process gracefully.
root/ConnectionType/ssh/coreSettings/watchPid
If set to 1, the connection is monitored under the name
specified by appName. This key should not need to be
modified.
root/ConnectionType/ssh/coreSettings/
wrapperScript
Sets the script or binary to execute when launching this
connection type. This is the primary script handling all
connection settings and command line arguments for the
connection. This key should not need to be modified.
root/ConnectionType/ssh/gui/SshManager/name
This registry key is either used internally or reserved for
future use. The value should not be changed.
root/ConnectionType/ssh/gui/SshManager/status
This registry key is either used internally or reserved for
future use. The value should not be changed.
98 Appendix E Registry keys