HP ThinPro 5.1 - Administrator Guide

Table E-9 root > ConnectionType > view (continued)
Registry key Description
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/mouseMotionEvents
If set to 0, mouse motion events are not sent to the server.
This can prevent some user feedback such as tooltips from
functioning properly.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/offScreenBitmaps
If set to 0, off-screen bitmaps are disabled. This can increase
performance slightly but will cause blocks of the screen to
update asynchronously, causing screen transitions to update
non-uniformly.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/perfFlagDesktopComposition
If set to 1, desktop composition (such as translucent borders)
is allowed if supported by the server. Turning off desktop
composition can improve performance for low-bandwidth
connections. Generally, this only affects RemoteFX. If set to
2, the value is selected based on the thin client performance.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/perfFlagFontSmoothing
If set to 1, font smoothing is allowed if supported by the
server and enabled. Turning off font smoothing can improve
performance on low-bandwidth connections. If set to 2, the
value is selected based on the thin client performance.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/perfFlagNoCursorSettings
If set to 1, cursor blinking is disabled, which can improve
performance on low-bandwidth RDP connections. If set to 2,
the value is selected based on the thin client performance.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/perfFlagNoCursorShadow
If set to 1, mouse cursor shadows are disabled, which can
improve performance on low-bandwidth RDP connections. If
set to 2, the value is selected based on the thin client
performance.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/perfFlagNoMenuAnimations
If set to 1, menu animations are disabled, which can improve
performance on low-bandwidth RDP connections. If set to 2,
the value is selected based on the thin client performance.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/perfFlagNoTheming
If set to 1, user interface themes are disabled, which can
improve performance on low-bandwidth RDP connections. If
set to 2, the value is selected based on the thin client
performance.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/perfFlagNoWallpaper
If set to 1, the desktop wallpaper is disabled, which can
improve performance on low-bandwidth RDP connections. If
set to 2, the value is selected based on the thin client
performance.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/perfFlagNoWindowDrag
If set to 1, full-content window dragging is disabled, which
can improve performance on low-bandwidth RDP
connections. The window outline is used instead. If set to 2,
the value is selected based on the thin client performance.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/portMapping
If set to 1, the following serial and parallel ports are
redirected to the remote host: ttyS0, ttyS1, ttyS2, ttyS3,
ttyUSB0, lp0.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/printerMapping
If set to 1, all printers defined locally via CUPS are redirected
to the remote host.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/rdpEncryption
If set to 1, standard RDP encryption is used to encrypt all
data between the client and the server.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/remoteFx
If set to 1, RemoteFX is used if available.
root/ConnectionType/view/connections/<UUID>/
xfreerdpOptions/securityLevel
Sets the certificate security level. If set to 0, all connections
are allowed. If set to 1, remembered hosts are checked and
root > ConnectionType 111