HP ThinPro 5.1 - Administrator Guide

Table E-11 root > ConnectionType > xen (continued)
Registry key Description
root/ConnectionType/xen/general/
hotKey<1thru15>Char
Sets the hot key to forward to the remote session when the
key or key combination set in the corresponding
hotKeyShift is pressed.
root/ConnectionType/xen/general/
hotKey<1thru15>Shift
Sets the key or key combination used to activate the hot key
set in the corresponding hotKeyChar.
root/ConnectionType/xen/general/
httpAddresses/<UUID>/address
root/ConnectionType/xen/general/
keyPassthroughEscapeChar
Sets the keyboard key for disabling the transparent keyboard
mode. This setting directly maps to the Citrix .ini file setting
KeyPassthroughEscapeChar.
root/ConnectionType/xen/general/
keyPassthroughEscapeShift
Sets the keyboard key combination for disabling the
transparent keyboard mode. This setting directly maps to the
Citrix .ini file setting KeyPassthroughEscapeShift.
root/ConnectionType/xen/general/
lastComPortNum
Sets the number of mapped serial ports. If set to 0, serial
port mapping is disabled.
root/ConnectionType/xen/general/localTextEcho
Controls keyboard latency reduction. This setting indirectly
maps to the Citrix .ini file setting ZLKeyboardMode.
root/ConnectionType/xen/general/
monitorNetwork
If set to Off, network connectivity is not monitored. If set to
Local network link status only, only the local
network link status is monitored. If set to Server online
status, both the local network link status and server
connectivity are monitored.
root/ConnectionType/xen/general/
mouseClickFeedback
Controls mouse latency reduction. This setting indirectly
maps to the Citrix .ini file setting ZLMouseMode.
root/ConnectionType/xen/general/
mouseMiddleButtonPaste
If set to 1, middle mouse button paste emulation for Windows
sessions is enabled. This setting directly maps to the
Citrix .ini file setting MouseSendsControlV.
root/ConnectionType/xen/general/noInfoBox
If set to 1, the client manager (wfcmgr) will not display when
a client session terminates. This setting directly maps to the
Citrix .ini file setting PopupOnExit.
root/ConnectionType/xen/general/
printerAutoCreation
If set to 0, printer mapping is disabled. If set to 1, printers
defined locally will be mapped to the connection. If set to 2,
USB printers are redirected as configured in the USB
Manager.
root/ConnectionType/xen/general/proxyAddress
Sets the proxy address to use if a manual proxy setting is
selected via proxyType.
root/ConnectionType/xen/general/proxyPassword
Sets the proxy password to use if a manual proxy setting is
selected via proxyType. This password will be encrypted
using rc4 encryption.
root/ConnectionType/xen/general/proxyPort
Sets the proxy port to use if a manual proxy setting is
selected via proxyType.
root/ConnectionType/xen/general/proxyType
Sets the type of proxy to use for XenDesktop connections.
The value
Use Browser settings is only supported if a
local browser is installed.
root/ConnectionType/xen/general/proxyUser
Sets the proxy username to use if a manual proxy setting is
selected via proxyType.
124 Appendix E Registry keys