HP ThinPro 5.1 - Administrator Guide

Table E-14 root > Network (continued)
Registry key Description
root/Network/IPSec/IPSecRules/<UUID>/DstAddr
Sets the destination address for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethod
Sets the authentication method for the IPSec rule. PSK is for
using a pre-shared key, and Certificate is for using
certificate files.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodCACert
If the authentication method is Certificate, the CA
certificate file path is saved in this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodClientCert
If the authentication method is Certificate, the client
certificate file path is saved in this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodPresharedKey
If the authentication method is PSK, the pre-shared key value
is saved in this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodPrivateKey
If the authentication method is Certificate, the private
key file path that corresponds with the client certificate is
saved in this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMDHGroup
Sets the phase 1 Diffie-Hellman group.
root/Network/IPSec/IPSecRules/<UUID>/
MMEncryptionAlg
Sets the phase 1 encryption algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
MMIntegrityAlg
Sets the phase 1 integrity algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
MMLifetimeMinutes
Sets the phase 1 lifetime.
root/Network/IPSec/IPSecRules/<UUID>/
QMAHEnable
Enables phase 2 AH.
root/Network/IPSec/IPSecRules/<UUID>/
QMAHIntegrityAlg
Sets the phase 2 AH integrity algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
QMESPEnable
Enables phase 2 ESP.
root/Network/IPSec/IPSecRules/<UUID>/
QMESPEncryptionAlg
Sets the phase 2 ESP encryption algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
QMESPIntegrityAlg
Sets the phase 2 ESP integrity algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
QMLifetimeSeconds
Sets the phase 2 lifetime.
root/Network/IPSec/IPSecRules/<UUID>/
RuleDescription
Sets the description for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
RuleEnable
If set to 1, the rule is enabled.
root/Network/IPSec/IPSecRules/<UUID>/RuleName
Sets the name for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/SrcAddr
Sets the source address for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
TunnelDstAddr
Sets the tunnel destination address for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
TunnelEnable
Enables tunnel mode for the IPSec rule.
132 Appendix E Registry keys