HP ThinPro 5.1 - Administrator Guide

Table E-14 root > Network (continued)
Registry key Description
keys are used. HP does not recommend using Static in a
generic client profile because it will cause all clients to
receive the same IP address.
root/Network/Wired/Security/CACert
Sets the path to CA certificate file.
root/Network/Wired/Security/Identity
Sets the identity or anonymous identity.
root/Network/Wired/Security/InnerAuth
Sets the PEAP inner authentication protocol.
root/Network/Wired/Security/InnerAuthTTLS
Sets the TTLS inner authentication protocol.
root/Network/Wired/Security/PEAPVersion
Sets the PEAP version.
root/Network/Wired/Security/Password
Sets the password.
root/Network/Wired/Security/PrivateKey
Sets the path to a private key file. This is only used for TLS
authentication.
root/Network/Wired/Security/Type
Sets the 802.1x authentication type.
root/Network/Wired/Security/UserCert
Sets the path to a user certificate file. This is only used for
TLS authentication.
root/Network/Wired/Security/Username
Sets the username.
root/Network/Wired/SubnetMask
Sets the subnet mask of the device, such as 255.255.255.0
(for a standard class C subnet). This setting will only take
effect when Method is set to Static.
root/Network/Wireless/DefaultGateway
Sets the default gateway the device will use to communicate
with the Internet. Typically this is the IP address of the router.
This setting will only take effect when Method is set to
Static.
root/Network/Wireless/EnableDefGatewayAsDNS
If set to 1, the default gateway will also be the name server.
root/Network/Wireless/IPAddress
Sets the IPv4 address of the client. This setting will only take
effect when Method is set to Static.
root/Network/Wireless/IPv6Enable
If set to 1, IPv6 is enabled.
root/Network/Wireless/Interface
Sets the default wireless interface or wireless network
adapter.
root/Network/Wireless/Method
If set to Automatic, the client will use DHCP to attempt to
retrieve network settings. If set to Static, the values of the
IPAddress, SubnetMask, and DefaultGateway registry
keys are used. HP does not recommend using Static in a
generic client profile because it will cause all clients to
receive the same IP address.
root/Network/Wireless/PowerEnable
If set to 1, power management of the wireless network card
is enabled.
root/Network/Wireless/SSID
Sets the wireless access point to use via its SSID.
root/Network/Wireless/SSIDHidden
Specifies if the SSID of the wireless access point is hidden.
root/Network/Wireless/Security/CACert
Sets the path to CA certificate file.
root/Network/Wireless/Security/EAPFASTPAC
Sets the path to the PAC file for EAP FAST authentication.
134 Appendix E Registry keys