HP ThinPro 5.1 - Administrator Guide

Table E-14 root > Network (continued)
Registry key Description
root/Network/Wireless/Security/
EAPFASTProvision
Sets the provisioning option for EAP FAST authentication.
root/Network/Wireless/Security/Identity
Sets the identity or anonymous identity.
root/Network/Wireless/Security/InnerAuth
Sets the PEAP inner authentication protocol.
root/Network/Wireless/Security/InnerAuthTTLS
Sets the TTLS inner authentication protocol.
root/Network/Wireless/Security/PEAPVersion
Sets the PEAP version.
root/Network/Wireless/Security/Password
Sets the password.
root/Network/Wireless/Security/PrivateKey
Sets the path to a private key file. This is only used for TLS
authentication.
root/Network/Wireless/Security/Type
Sets the wireless authentication type.
root/Network/Wireless/Security/UserCert
Sets the path to a user certificate file. This is only used for
TLS authentication.
root/Network/Wireless/Security/Username
Sets the username.
root/Network/Wireless/Security/WEPAuth
Sets the WEP authentication type.
root/Network/Wireless/Security/WEPIndex
Sets the WEP password index.
root/Network/Wireless/SubnetMask
Sets the subnet mask of the device, such as 255.255.255.0
(for a standard class C subnet). This setting will only take
effect when Method is set to Static.
root/Network/disableLeftClickMenu
If set to 1, the left-click menu for the network system tray
icon is disabled.
root/Network/disableRightClickMenu
If set to 1, the right-click menu for the network system tray
icon is disabled.
root/Network/iPeak/ShowStatus
If set to 1, the HP Velocity status is displayed as part of the
system tray icon.
root/Network/iPeak/Status
If set to 1, HP Velocity is enabled. If set to 2, HP Velocity is
enabled in Monitor mode. If set to 0, HP Velocity is disabled.
root/Network/userLock
If set to 1, and if the network settings have been modified by
the user, the network settings are preserved when importing
an HP ThinPro profile.
root/Network/userLockEngaged
This sets to 1 after the display settings have been modified
by the user. You normally do not need to modify this setting.
root > SCIM
Table E-15 root > SCIM
Registry key Description
root/SCIM/ScimEnabled
If set to 1, SCIM is enabled for Chinese, Japanese, and
Korean input.
root > SCIM 135