HP ThinPro 5.1 - Administrator Guide

Table E-28 root > screensaver (continued)
Registry key Description
root/screensaver/off
Sets the timeout delay in minutes before the monitor turns
off.
root/screensaver/origImageCopyPath
This is the path where the custom image is saved when
mode is set to Default.
root/screensaver/standby
Sets the timeout delay in minutes before the monitor goes
into standby mode.
root/screensaver/suspend
Sets the timeout delay in minutes before the monitor goes
into suspend mode.
root/screensaver/timeoutScreensaver
Sets the timeout delay in minutes before the screen saver
starts.
root/screensaver/timeoutSleep
Sets the timeout delay in minutes before the thin client goes
into sleep mode.
root > security
Table E-29 root > security
Registry key Description
root/security/mustLogin
If set to 1, all users are forced to log in before accessing the
desktop.
root > sshd
Table E-30 root > sshd
Registry key Description
root/sshd/enabled
If set to 1, the SSH daemon is enabled and the client can be
accessed via SSH.
root/sshd/userAccess
If set to 1, standard users can connect to the client via SSH.
root > time
Table E-31 root > time
Registry key Description
root/time/NTPServers
Specifies NTP servers to use via a comma-separated list.
Private NTP servers or large virtual NTP clusters such as
pool.ntp.org are the best choices to minimize server
load. Clear this value to return to using DHCP servers (tag
42) instead of a fixed list.
root/time/TimeServerIPAddress
Sets the time server used by the Linux net command. These
servers are typically the domain controller servers on the
corporate network. This should be used when NTP servers
are not configured or they are not responding. The Linux net
root > security 143