HP ThinPro 5.1 - Administrator Guide

Table E-31 root > time (continued)

Registry key Description

command identifies this server on its own. However, specific

server IP addresses can be provided here if desired.

root/time/WebServerURL

Sets the web server URL (such as hp.com) to use when

fetching the time using the http protocol. This URL can be

within an intranet or over the Internet.

root/time/timezone

Sets the time zone. Time zones should be specified as

defined by Linux Timezone in the Date and Time utility in the

Control Panel, and they should be in the following format:

<region>/<subregion>.

root/time/use24HourFormat

If set to -1, the system chooses the format automatically

according to the locale. If set to 0, the a.m./p.m. format is

used. If set to 1, the 24-hour format is used.

root/time/useDHCPTimezone

If set to 1, the client attempts to set the time zone via DHCP.

To properly set the time zone via this registry key, ensure

that the DHCP server for the client forwards the tcode

DHCP tag (which is usually tag 101, although 100 and 2 can

work also).

root/time/useNTPServers

If set to 1, the use of NTP time servers to synchronize the

client clock is enabled. If this is enabled, ensure that an NTP

server is specified via DHCP or via NTPServers.

root > touchscreen

Table E-32 root > touchscreen

Registry key Description

root/touchscreen/calibrated

This registry key is either used internally or reserved for