HP ThinPro 5.1 - Administrator Guide

root > vncserver
Table E-36 root > vncserver
Registry key Description
root/vncserver/coreSettings/enableVncShadow
If set to 1, the VNC shadowing server for the thin client is
enabled.
root/vncserver/coreSettings/
userNotificationMessage
Sets the notification message that is shown to the user when
someone is attempting to connect to the thin client using
VNC.
root/vncserver/coreSettings/
vncNotifyShowTimeout
If set to 1, a timeout is applied to the notification dialog that is
shown to the user when someone is attempting to connect to
the thin client using VNC.
root/vncserver/coreSettings/vncNotifyTimeout
Sets the timeout in seconds for the notification dialog that is
shown to the user when someone is attempting to connect to
the thin client using VNC.
root/vncserver/coreSettings/vncNotifyUser
If set to 1, a notification is shown to the user when someone
is attempting to connect to the thin client using VNC.
root/vncserver/coreSettings/vncPassword
Sets the password for VNC shadowing. The key
vncUsePassword must also be enabled.
root/vncserver/coreSettings/vncReadOnly
If set to 1, VNC shadowing will operate in view-only mode.
root/vncserver/coreSettings/
vncRefuseInDefault
If set to 1, VNC requests are refused automatically if the user
does not interact with the notification dialog before the
timeout.
root/vncserver/coreSettings/
vncTakeEffectRightNow
If set to 1, VNC settings take effect immediately after being
modified.
root/vncserver/coreSettings/vncUsePassword
If set to 1, the password specified in vncPassword is
required for VNC shadowing.
root/vncserver/coreSettings/vncUseSSL
If set to 1, SSL is used for VNC connections.
root/vncserver/gui/VNCShadowManager/name
This registry key is either used internally or reserved for
future use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/status
This registry key is either used internally or reserved for
future use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/title
This registry key is either used internally or reserved for
future use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/widgets/
enableVncShadow
Controls the state of the Enable VNC Shadow widget in the
VNC Shadow utility. If set to active, the widget is visible in
the UI and the user can interact with it. If set to inactive,
the widget is hidden. If set to read-only, the widget is
visible in the read-only state.
root/vncserver/gui/VNCShadowManager/widgets/
userNotificationMessage
Controls the state of the User Notification Message widget in
the VNC Shadow utility. If set to active, the widget is
visible in the UI and the user can interact with it. If set to
inactive, the widget is hidden. If set to read-only, the
widget is visible in the read-only state.
root/vncserver/gui/VNCShadowManager/widgets/
vncNotifyShowTimeout
Controls the state of the VNC Show Timeout for Notification
widget in the VNC Shadow utility. If set to active, the
widget is visible in the UI and the user can interact with it. If
148 Appendix E Registry keys