HP ThinPro 5.1 - Administrator Guide

10 Additional connection types (ThinPro
configuration only)
The connection types listed in this chapter are available only when the client is set to the ThinPro
configuration. For more information, see
Comparison of ThinPro and Smart Zero on page 1.
●
TeemTalk connection settings
●
XDMCP connection settings
●
SSH connection settings
●
Telnet connection settings
●
Custom connection settings
TeemTalk connection settings
TIP: For more information on HP TeemTalk, see the HP TeemTalk Terminal Emulator User Guide .
The following table describes the settings available in the TeemTalk Connection Manager. These
settings are connection-specific and apply to only the TeemTalk connection you are currently
configuring.
NOTE: For information about how to locate these settings, see
Using the Connection Manager
controls on page 6.
Table 10-1 TeemTalk Connection Manager > Configuration
Option Description
Name The connection name.
TeemTalk creation wizard Opens the TeemTalk Session Wizard. See the other tables in this section for
more information.
System beep Enables the system beep sound.
NOTE: See Common connection settings on page 25 for information about the settings available on
the final page of the TeemTalk Connection Manager.
The following tables describe the settings available in the TeemTalk Session Wizard, which is a
component of the TeemTalk Connection Manager. These settings are connection-specific and apply
to only the TeemTalk connection you are currently configuring.
NOTE: For information about how to locate these settings, see
Table 10-1 TeemTalk Connection
Manager > Configuration on page 51.
Table 10-2 TeemTalk Session Wizard > Page 1
Option Description
Session Name The name of the session.
TeemTalk connection settings 51