HP ThinPro 5.1 - Administrator Guide

Table 10-2 TeemTalk Session Wizard > Page 1 (continued)
Option Description
Transport The network transport to use for the connection. Valid transports are: TCP/IP,
Serial, SSH2, and SSL.
Connection The connection method to be used. Advanced connection options can be
configured via the button.
Emulation Emulation types are: hp70092, IBM 3151, IBM3270 Display, IBM3270 Printer,
IBM5250 Display, IBM5250 Printer, MD Prism, TA6530, VT Series, and Wyse.
Table 10-3 TeemTalk Session Wizard > Page 2
Option Description
Emulation Printer The HP TeemTalk emulation printer settings.
Auto Logon The HP TeemTalk auto login settings.
Key Macros The HP TeemTalk key macros settings.
Mouse Actions The HP TeemTalk mouse actions settings.
Soft Buttons The HP TeemTalk soft buttons settings.
Attributes The HP TeemTalk attributes settings.
Auxiliary Ports The HP TeemTalk auxiliary ports settings.
Hotspots The HP TeemTalk hotspots settings.
Table 10-4 TeemTalk Session Wizard > Page 3
Option Description
Preferences Displays the preferences shown in
Table 10-5 TeemTalk Session Wizard > Page
3 > Preferences on page 52.
Start session connected Starts the session connected.
Show Status Bar Displays the status bar for this connection.
Table 10-5 TeemTalk Session Wizard > Page 3 > Preferences
Option Description
Show Configuration Bar Displays the Configuration Bar.
Save Current Window Position Saves current window's size and position when you click Save Preferences. It will
be restored on the next system launch.
NOTE: Click Save Preferences each time you change the window size or
position to save the new values.
Run in Full Screen Mode Select to make the window full screen and remove the frame, soft buttons, menu,
and configuration bars.
NOTE: This option does not become effective until the next system launch and
overrides the Show Configuration Bar and Save Current Window Position options.
52 Chapter 10 Additional connection types (ThinPro configuration only)