HP ThinPro 5.1 - Administrator Guide

The following table describes the settings available in the Secure Shell Connection Manager. These
settings are connection-specific and apply to only the SSH connection you are currently configuring.
NOTE: For information about how to locate these settings, see
Using the Connection Manager
controls on page 6.
Table 10-8 Secure Shell Connection Manager > Configuration
Option Description
Name The connection name.
Address The IP address of the remote system.
Port The remote port to use for the connection.
User name The username to use for the connection.
Run application The application to run to make the connection.
Compression Select this option if you want to compress the data sent between the server and
thin client.
X11 connection forwarding If the server has an X server on it, select this option to allow the user to open user
interfaces from the SSH session and display them locally on the thin client.
Force TTY allocation Select this option and specify a command to initiate a temporary session to run
the command. Once the command has completed, the session will terminate. If no
command is specified, then the session will run normally as if the option were not
selected.
Foreground color The default color of the text in the SSH session.
Background color The default color of the background in the SSH session.
Font Valid options are: 7X14, 5X7, 5X8, 6X9, 6X12, 7X13, 8X13, 8X16, 9X15, 10X20,
and 12X24.
NOTE: See Common connection settings on page 25 for information about the settings available on
the final page of the SSH Connection Manager.
54 Chapter 10 Additional connection types (ThinPro configuration only)