HP ThinPro 5.1 - Administrator Guide

NOTE: For basic or test printing, the Generic Manufacturer or Generic/Text Only printer usually
works.
7. If prompted to keep the existing driver and it is known to work, keep it, and then click Next.
8. Assign a name to the printer. To use it as the default printer, select Yes, and then click Next.
9. To share the printer, select Share name and assign it a share name. Otherwise, click Next.
10. On the next page, you may request a test print. HP recommends this because it will verify the
printer setup is correct. If it is not set up properly, review the settings and try again.
NOTE: If the client disconnects from the server, the printer will need to be set up again the next
time the client connects.
Configuring a serial or parallel printer 65