HP ThinPro 5.1 - Administrator Guide

root > ConnectionManager
Table E-2 root > ConnectionManager
Registry key Description
root/ConnectionManager/customLogoPath
root/ConnectionManager/defaultConnection
To properly launch a connection on startup, this must be set
to a valid connection using the format <type>:<label> like
in the following example: xen:Default Connection
root/ConnectionManager/minHeight
root/ConnectionManager/minWidth
root/ConnectionManager/splashLogoPath
Sets the full path to the image displayed while a connection
is loading.
root/ConnectionManager/useKioskMode
root/ConnectionManager/
useSplashOnConnectionStartup
If set to 1, the image set by splashLogoPath is enabled.
By default, this is enabled for ThinPro and disabled for Smart
Zero.
root > ConnectionType
root > ConnectionType > custom
Table E-3 root > ConnectionType > custom
Registry key Description
root/ConnectionType/custom/authorizations/
user/add
If set to 1, a standard user has permission to add a new
connection of this type using the Connection Manager. This
key has no effect on Smart Zero.
root/ConnectionType/custom/authorizations/
user/general
If set to 1, a standard user has permission to modify the
general settings for this connection type using the
Connection Manager. This key has no effect on Smart Zero.
root/ConnectionType/custom/connections/
<UUID>/afterStartedCommand
Sets the command to execute after the connection has been
started.
root/ConnectionType/custom/connections/
<UUID>/afterStoppedCommand
Sets the command to execute after the connection has been
stopped.
root/ConnectionType/custom/connections/
<UUID>/authorizations/user/edit
If set to 1, a standard user has permission to modify the
connection settings for this connection.
root/ConnectionType/custom/connections/
<UUID>/authorizations/user/execution
If set to 1, a standard user has permission to execute this
connection.
root/ConnectionType/custom/connections/
<UUID>/autoReconnect
If set to 1, the connection will be restarted when it is closed
or disconnected.
root/ConnectionType/custom/connections/
<UUID>/autoReconnectDelay
Sets the amount of time in seconds to wait before
reconnecting the session. The default of 0 will cause the
connection to reconnect immediately. This setting only takes
effect when autoReconnect is set to 1.
82 Appendix E Registry keys