HP ThinPro 5.1 - Administrator Guide

Table E-3 root > ConnectionType > custom (continued)
Registry key Description
root/ConnectionType/custom/connections/
<UUID>/autostart
If set to a value of 1–5, the connection will be started
automatically after the system boots, with the value of 1
having the highest priority.
root/ConnectionType/custom/connections/
<UUID>/autostartDelay
Sets the amount of time in seconds to wait before starting
the connection after the system boots. The default of 0 will
cause the connection to start immediately. This setting only
takes effect when autostart is set to 1.
root/ConnectionType/custom/connections/
<UUID>/beforeStartingCommand
Sets the command to execute before the connection starts.
root/ConnectionType/custom/connections/
<UUID>/command
Sets the main command for the custom connection to
execute.
root/ConnectionType/custom/connections/
<UUID>/connectionEndAction
This registry key is either used internally or reserved for
future use. The value should not be changed.
root/ConnectionType/custom/connections/
<UUID>/coord
This registry key is either used internally or reserved for
future use. The value should not be changed.
root/ConnectionType/custom/connections/
<UUID>/dependConnectionId
This registry key is either used internally or reserved for
future use. The value should not be changed.
root/ConnectionType/custom/connections/
<UUID>/extraEnvValues/<UUID>/key
Sets the name of an extra environment variable for use with
the connection.
root/ConnectionType/custom/connections/
<UUID>/extraEnvValues/<UUID>/value
Sets the value of an extra environment variable for use with
the connection.
root/ConnectionType/custom/connections/
<UUID>/fallBackConnection
Sets the fallback connection via its UUID.
root/ConnectionType/custom/connections/
<UUID>/hasDesktopIcon
If set to 1, the desktop icon for this connection is enabled.
This key has no effect on Smart Zero.
root/ConnectionType/custom/connections/
<UUID>/label
Sets the connection name that is displayed in the UI. On
Smart Zero, this will typically be set to Default
Connection and does not display in the UI.
root/ConnectionType/custom/connections/
<UUID>/startMode
If set to the default focus and the connection is already
started, the connection will be given focus. Otherwise, an
error will be returned stating that the connection is already
started.
root/ConnectionType/custom/connections/
<UUID>/waitForNetwork
If set to 1, the connection will not be launched until
networking is available. This ensures that, on a slow
network, the connection does not launch before networking
is available, which could cause a failure.
root/ConnectionType/custom/coreSettings/
appName
Sets the internal application name to use for this connection
type. This key should not need to be modified.
root/ConnectionType/custom/coreSettings/
className
Sets the internal application class name to use for this
connection type. This key should not need to be modified.
root/ConnectionType/custom/coreSettings/
editor
Sets the internal application name to use when the
Connection Manager is launched for this connection type.
This key should not need to be modified.
root/ConnectionType/custom/coreSettings/
generalSettingsEditor
Sets the internal application name to use when the General
Settings Manager is launched for this connection type. This
key should not need to be modified.
root > ConnectionType 83