HP ThinPro 5.2 - Administrator Guide

Table E-12 root > ConnectionType > xen (continued)
Registry key Description
root/ConnectionType/xen/connections/<UUID>/
afterStartedCommand
Sets the command to execute after the connection has been
started.
root/ConnectionType/xen/connections/<UUID>/
afterStoppedCommand
Sets the command to execute after the connection has been
stopped.
root/ConnectionType/xen/connections/<UUID>/
anonymousLogin
If set to 1, anonymous login is allowed for PNAgent and direct
connections.
root/ConnectionType/xen/connections/<UUID>/
appInMenu
If set to 1, all applications for the connection will be displayed in
the taskbar menu.
root/ConnectionType/xen/connections/<UUID>/
appOnDashboard
If set to 1, all applications for the connection will be displayed on
the taskbar.
root/ConnectionType/xen/connections/<UUID>/
appOnDesktop
If set to 1, all applications for the connection will be displayed on
the desktop.
root/ConnectionType/xen/connections/<UUID>/
authorizations/user/edit
If set to 1, a standard user has permission to modify the
connection settings for this connection.
root/ConnectionType/xen/connections/<UUID>/
authorizations/user/execution
If set to 1, a standard user has permission to execute this
connection.
root/ConnectionType/xen/connections/<UUID>/
autoLaunchSingleApp
If set to 1, and if only a single published application or desktop is
returned by the Citrix server, that resource will be launched
automatically.
root/ConnectionType/xen/connections/<UUID>/
autoReconnect
If set to 1, the connection will be restarted when it is closed or
disconnected.
root/ConnectionType/xen/connections/<UUID>/
autoReconnectAppsOnLogin
If set to 1, the system will attempt to reconnect any active or
disconnected Citrix sessions upon initial login.
root/ConnectionType/xen/connections/<UUID>/
autoReconnectDelay
Sets the amount of time in seconds to wait before reconnecting
the session. The default of 0 will cause the connection to
reconnect immediately. This setting only takes eect when
autoReconnect is set to 1.
root/ConnectionType/xen/connections/<UUID>/
autoRefreshInterval
Controls the amount of time in seconds before the resources are
cleared and refreshed again from the server. Set to -1 to disable.
It is normally not required to frequently refresh the resources
from the server.
root/ConnectionType/xen/connections/<UUID>/
autoStartDesktop
If set to 1, the rst desktop to become available when the
connection is started will be launched automatically.
root/ConnectionType/xen/connections/<UUID>/
autoStartResource
Sets the name of the desktop or application to start automatically
when the connection is launched.
root/ConnectionType/xen/connections/<UUID>/
autostart
If set to a value of 1–5, the connection will be started
automatically after the system boots, with the value of 1 having
the highest priority.
root/ConnectionType/xen/connections/<UUID>/
autostartDelay
Sets the amount of time in seconds to wait before starting the
connection after the system boots. The default of 0 will cause the
connection to start immediately. This setting only takes eect
when autostart is set to 1.
root/ConnectionType/xen/connections/<UUID>/
beforeStartingCommand
Sets the command to execute before the connection starts.
root/ConnectionType/xen/connections/<UUID>/
connectionEndAction
This registry key is either used internally or reserved for future
use. The value should not be changed.
120 Appendix E Registry keys