HP ThinPro 5.2 - Administrator Guide

Table E-12 root > ConnectionType > xen (continued)
Registry key Description
root/ConnectionType/xen/connections/<UUID>/
loginfields/showpassword
If set to 1, the Show password button is shown in the login dialog
for the connection. If set to 2, the button is shown but disabled. If
set to 0, the button is hidden.
root/ConnectionType/xen/connections/<UUID>/
loginfields/smartcard
If set to 1, the Smart card login checkbox is shown in the login
dialog for the connection. If set to 2, the checkbox is shown but
disabled. If set to 0, the checkbox is hidden. This checkbox might
not appear if no smart card is detected, even if this option is
enabled.
root/ConnectionType/xen/connections/<UUID>/
loginfields/username
If set to 1, the User Name eld is shown in the login dialog for the
connection. If set to 2, the eld is shown but disabled. If set to 0,
the eld is hidden.
root/ConnectionType/xen/connections/<UUID>/
password
Sets the default password to supply to the remote host during
login. This value will be encrypted. Generally, this setting is used
for kiosk-style applications where a generic password is used for
login.
root/ConnectionType/xen/connections/<UUID>/
requireCredentialsDirectConnect
If set to 0, credentials are not needed to initiate a direct
connection. However, credentials are needed to launch an
application.
root/ConnectionType/xen/connections/<UUID>/
savePassword
root/ConnectionType/xen/connections/<UUID>/
smartCardModuleKey
Species the security module to use for a smart card connection.
root/ConnectionType/xen/connections/<UUID>/
startMode
If set to the default focus and the connection is already started,
the connection will be given focus. Otherwise, an error will be
returned stating that the connection is already started.
root/ConnectionType/xen/connections/<UUID>/
unplugSmartCardAction
Sets the action to perform when a smart card is unplugged during
a connection. logoffwill log o the current session. closewill
close all the opened resources. noactionwill do nothing.
root/ConnectionType/xen/connections/<UUID>/
username
Sets the default user name to supply to the remote host during
login. Generally, this setting is used for kiosk-style applications
where a generic user name is used for login.
root/ConnectionType/xen/connections/<UUID>/
waitForNetwork
If set to 1, the connection will not be launched until networking is
available. This ensures that, on a slow network, the connection
does not launch before networking is available, which could cause
a failure.
root/ConnectionType/xen/coreSettings/
USBrelevant
Species if this connection type is USB-relevant. If it is, it might
have a USB plugin for redirecting USB devices.
root/ConnectionType/xen/coreSettings/appName
Sets the internal application name to use for this connection type.
This key should not need to be modied.
root/ConnectionType/xen/coreSettings/
autoLogoutDelayAfterLaunch
This setting applies to Citrix servers with multiple published
resources. If less than 0, no auto-logout is performed. Otherwise,
this setting dictates the number of seconds between the closing
of the last Xen published resource and when the user is logged
out automatically and returned to the initial login screen. Citrix
process delays might extend the auto-logout time.
root/ConnectionType/xen/coreSettings/
autoLogoutDelayBeforeLaunch
This setting applies to Citrix servers with multiple published
resources. If less than 0, no auto-logout is performed. Otherwise,
this setting dictates the number of seconds allowed to pass while
no applications are launched before the user is logged out
122 Appendix E Registry keys