HP ThinPro 5.2 - Administrator Guide

Table E-16 root > Network (continued)
Registry key Description
root/Network/Wired/Method
If set to Automatic, the thin client will use DHCP to attempt to
retrieve network settings. If set to Static, the values of the
IPAddress, SubnetMask, and DefaultGateway registry
keys are used. HP does not recommend using Static in a
generic ThinPro prole because it will cause all thin clients to
receive the same IP address.
root/Network/Wired/Security/CACert
Sets the path to CA certicate le.
root/Network/Wired/Security/EnableMachineAuth
If set to 1, machine authentication for PEAP is enabled.
root/Network/Wired/Security/Identity
Sets the identity or anonymous identity.
root/Network/Wired/Security/InnerAuth
Sets the PEAP inner authentication protocol.
root/Network/Wired/Security/InnerAuthTTLS
Sets the TTLS inner authentication protocol.
root/Network/Wired/Security/PEAPVersion
Sets the PEAP version.
root/Network/Wired/Security/Password
Sets the password.
root/Network/Wired/Security/PrivateKey
Sets the path to a private key le. This is only used for TLS
authentication.
root/Network/Wired/Security/Type
Sets the 802.1x authentication type.
root/Network/Wired/Security/UserCert
Sets the path to a user certicate le. This is only used for TLS
authentication.
root/Network/Wired/Security/Username
Sets the username.
root/Network/Wired/SubnetMask
Sets the subnet mask of the device, such as 255.255.255.0 (for a
standard class C subnet). This setting will only take eect when
Method is set to Static.
root/Network/Wireless/DefaultGateway
Sets the default gateway the device will use to communicate with
the Internet. Typically this is the IP address of the router. This
setting will only take eect when Method is set to Static.
root/Network/Wireless/EnableDefGatewayAsDNS
If set to 1, the default gateway will also be the name server.
root/Network/Wireless/IPAddress
Sets the IPv4 address of the thin client. This setting will only take
eect when Method is set to Static.
root/Network/Wireless/IPv6Enable
If set to 1, IPv6 is enabled.
root/Network/Wireless/Interface
Sets the default wireless interface or wireless network adapter.
root/Network/Wireless/Method
If set to Automatic, the thin client will use DHCP to attempt to
retrieve network settings. If set to Static, the values of the
IPAddress, SubnetMask, and DefaultGateway registry
keys are used. HP does not recommend using Static in a
generic ThinPro prole because it will cause all thin clients to
receive the same IP address.
root/Network/Wireless/PowerEnable
If set to 1, power management of the wireless network card is
enabled.
root/Network/Wireless/SSID
Sets the wireless access point to use via its SSID.
root/Network/Wireless/SSIDHidden
Species if the SSID of the wireless access point is hidden.
root/Network/Wireless/SSIDWhiteList
Species a whitelist for wireless access points. If this registry
key's value is not empty, only the SSIDs specied in the value will
root > Network 137