HP ThinPro 5.2 - Administrator Guide

Table E-16 root > Network (continued)
Registry key Description
be shown in the wireless access point scan results. Use a
semicolon to separate the SSIDs.
root/Network/Wireless/Security/CACert
Sets the path to CA certicate le.
root/Network/Wireless/Security/EAPFASTPAC
Sets the path to the PAC le for EAP FAST authentication.
root/Network/Wireless/Security/
EAPFASTProvision
Sets the provisioning option for EAP FAST authentication.
root/Network/Wireless/Security/Identity
Sets the identity or anonymous identity.
root/Network/Wireless/Security/InnerAuth
Sets the PEAP inner authentication protocol.
root/Network/Wireless/Security/InnerAuthTTLS
Sets the TTLS inner authentication protocol.
root/Network/Wireless/Security/PEAPVersion
Sets the PEAP version.
root/Network/Wireless/Security/Password
Sets the password.
root/Network/Wireless/Security/PrivateKey
Sets the path to a private key le. This is only used for TLS
authentication.
root/Network/Wireless/Security/Type
Sets the wireless authentication type.
root/Network/Wireless/Security/UserCert
Sets the path to a user certicate le. This is only used for TLS
authentication.
root/Network/Wireless/Security/Username
Sets the username.
root/Network/Wireless/Security/WEPAuth
Sets the WEP authentication type.
root/Network/Wireless/Security/WEPIndex
Sets the WEP password index.
root/Network/Wireless/SubnetMask
Sets the subnet mask of the device, such as 255.255.255.0 (for a
standard class C subnet). This setting will only take eect when
Method is set to Static.
root/Network/disableLeftClickMenu
If set to 1, the left-click menu for the network system tray icon is
disabled.
root/Network/disableRightClickMenu
If set to 1, the right-click menu for the network system tray icon is
disabled.
root/Network/iPeak/ShowStatus
If set to 1, the HP Velocity status is displayed as part of the
system tray icon. HP Velocity is not supported on the HP t420.
root/Network/iPeak/Status
If set to 1, HP Velocity is enabled. If set to 2, HP Velocity is
enabled in Monitor mode. If set to 0, HP Velocity is disabled. HP
Velocity is not supported on the HP t420.
root/Network/userLock
If set to 1, and if the network settings have been modied by the
user, the network settings are preserved when importing a
ThinPro prole.
root/Network/userLockEngaged
This registry key is set to 1 automatically after the network
settings have been modied by the user. You normally do not
need to modify this setting.
138 Appendix E Registry keys