HP ThinPro 5.2 - Administrator Guide

root > TaskMgr
Table E-22 root > TaskMgr
Registry key Description
root/TaskMgr/General/AlwaysOnTop
If set to 1, the Task Manager window is always on top.
root > USB
Table E-23 root > USB
Registry key Description
root/USB/Classes/<ClassType>/ClassID
Sets the USB class ID number.
root/USB/Classes/<ClassType>/DisplayName
Sets the USB class name.
root/USB/Classes/<ClassType>/State
Sets whether the class is mapped to the remote host.
root/USB/Classes/<ClassType>/Visible
Sets whether the class is shown in the UI, not shown in the UI, or
disabled.
root/USB/Classes/ShowTab
If set to 1, the Classes section is shown in the USB Manager.
root/USB/Devices/<UUID>/DisplayName
Sets the name to show in the USB Manager. If not supplied, the
USB Manager will attempt to generate an appropriate name using
device information.
root/USB/Devices/<UUID>/ProductID
Sets the product ID of the device.
root/USB/Devices/<UUID>/State
Sets whether this device is mapped to the remote host as follows:
0=Do Not Redirect; 1=Use Defaults; 2=Redirect.
root/USB/Devices/<UUID>/VendorID
Sets the vendor ID of the device.
root/USB/root/autoSwitchProtocol
If set to 1, the remote USB protocol will switch automatically
based on which protocol is chosen.
root/USB/root/mass-storage/allowed
If set to 1, mass storage devices will be mounted automatically
when the protocol is local.
root/USB/root/mass-storage/read-only
If set to 1, when mass storage devices are mounted automatically,
they will be mounted as read-only.
root/USB/root/opendebug
If set to 1, a debug message will be written to /tmp/USB-mgr-
log.
root/USB/root/protocol
Sets which protocol owns remote USB. Valid values depend on
which protocols are installed on the system but can include
local, xen, freerdp, and view.
root > auto-update
Table
E-24 root > auto-update
Registry key Description
root/auto-update/DNSAliasDir
Sets the default root directory for DNS alias mode on the server
hosting HP Smart Client Services.
142 Appendix E Registry keys