HP ThinPro 5.2 - Administrator Guide

10 Additional connection types (ThinPro
conguration only)
The connection types listed in this chapter are available only when the thin client is set to the ThinPro
conguration. For more information, see Comparison of ThinPro and Smart Zero on page 1.
●
TeemTalk connection settings
●
XDMCP connection settings
●
SSH connection settings
●
Telnet connection settings
●
Custom connection settings
TeemTalk connection settings
TIP: For more information on HP TeemTalk, see the HP TeemTalk Terminal Emulator User Guide.
The following table describes the settings available in the TeemTalk Connection Manager. These settings are
connection-specic and apply to only the TeemTalk connection you are currently conguring.
NOTE: For information about how to locate these settings, see Using the Connection Manager controls
on page 6.
Table 10-1 TeemTalk Connection Manager > Conguration
Option Description
Name The connection name.
TeemTalk creation wizard Opens the TeemTalk Session Wizard. See the other tables in this section for more
information.
System beep Enables the system beep sound.
NOTE: See Common connection settings on page 26 for information about the settings available on the nal
page of the TeemTalk Connection Manager.
The following tables describe the settings available in the TeemTalk Session Wizard, which is a component of
the TeemTalk Connection Manager. These settings are connection-specic and apply to only the TeemTalk
connection you are currently conguring.
NOTE: For information about how to locate these settings, see Table 10-1 TeemTalk Connection Manager >
Conguration on page 53.
Table 10-2 TeemTalk Session Wizard > Page 1
Option Description
Session Name The name of the session.
TeemTalk connection settings 53