HP ThinPro 5.2 - Administrator Guide

Table 10-5 TeemTalk Session Wizard > Page 3 > Preferences (continued)
Option Description
Browser Command In the box, type the command that runs your web browser, such as:
/ display html links Firefox
Command Line Start Up Options Use to specify an alternate location for the startup options.
NOTE: For specic information on HP TeemTalk Command Line Startup Options, see
the HP TeemTalk Terminal Emulator User Guide.
Table 10-6 TeemTalk Session Wizard > Page 4
Component Description
Summary Session Information Displays a summary of the session that is to be created.
XDMCP connection settings
XDMCP is a way to connect directly to remote X servers. X servers are used to display graphics on most UNIX-
like operating systems, such as Linux, Berkeley Software Distribution (BSD), and Hewlett Packard UniX (HP-
UX).
The following table describes the settings available in the XDMCP Connection Manager. These settings are
connection-specic and apply to only the XDMCP connection you are currently conguring.
NOTE: For information about how to locate these settings, see Using the Connection Manager controls
on page 6.
Table 10-7 XDMCP Connection Manager > Conguration
Option Description
Name The connection name.
Type The XDMCP connection type. Valid options are: chooser, query, and broadcast.
Address This value is required if the Type value is set to query.
Use font server Use a remote X font server instead of locally installed fonts.
Font server Font server is not enabled unless the Use font server option is checked.
Congure display Click to set the display conguration for the connection. If you do not set this
conguration, the default conguration will be used.
NOTE: See Common connection settings on page 26 for information about the settings available on the nal
page of the XDMCP Connection Manager.
SSH connection settings
Secure Shell (SSH) is the most common way to gain remote command line access to UNIX-like operating
systems, such as Linux, BSD, and HP-UX. SSH is also encrypted.
XDMCP connection settings 55