HP ThinPro 5.2 - Administrator Guide

NOTE: Be sure you specify the hostname of the manual server in the prole that you are updating to.
Otherwise the settings reset to automatic when downloading the prole. Use the Prole Editor to modify
these settings at root/auto-update.
NOTE: If multiple thin clients require specic updates, use the DHCP tagging method.
If no update segregation is required, use the broadcast update method.
Performing a manual update
1. Select Management > Automatic Update in the Control Panel.
2. Select Enable manual conguration.
3. Set the Protocol as http.
4. In the Server eld, type the update server hostname and port in this format: <hostname>:18287
5. In the Path eld, type the following: auto-update
6. Select Preserve thin client conguration if you want to preserve all previously congured settings.
7. Click OK, and then the thin client will pull the updates.
Updating thin clients 61