HP ThinPro 5.2 - Administrator Guide
Table D-14 Login Screen > Elements > Custom > colors
Type Description
Parameter A space-separated list of [value,color] pairs, where the value is a
0.0–1.0 oating point fraction of the axis of measurement (for
example, the width of the screen in a linear width-axis gradient)
and the color is the color of the gradient at that point. The value
runs top-to-bottom for vertical linear gradients; left-to-right for
horizontal linear gradients; and center-to-edge for radial
gradients. Colors are specied as either six-digit hex or three 0–
255 comma-separated values.
Example colors: 0.0,000000 0.5,996600 0.9,255,255,255;
Default Not applicable
Use Colors are interpolated along the linear or radial axis between the
points and colors specied. If no values are given, the colors are
assumed to be evenly spaced on the axis between 0.0 and 1.0. If
the rst fractional value is greater than 0.0, the rst color will be
used in the space between the screen edge and the rst value.
Likewise, if the last value is less than 1.0, the last color will be
used between the last value and the screen edge. Values must be
in increasing sorted values, though a value can be repeated for a
sharp transition. For example, “0.0, CCCCCC 0.5,EEEEEE
0.5,660000 1.0,330000” in a vertical linear gradient would
specify a gradient between light grays on the upper half and dark
reds on the lower half.
Table D-15 Login Screen > Elements > Custom > dithered
Type Description
Parameter [true | false]
Example dithered: true;
Default false
Use If a gradient shows signs of color banding, dithering will eliminate
this visual artifact. Dithering is not supported for radial gradients
with the squared metric.
Image
Table
D-16 Login screen > Image
Type Description
Use Species an image to overlay a portion of the background.
Common attributes recognized name, size, alpha, position, alignment, context
Common attributes See the tables following.
Customizing the screen background 77