HP ThinPro 6.1 - Administrator Guide

Registry key Description
root/Network/FtpProxy
Sets the FTP proxy address. HP recommends using the following
format for this value because the http prex is better supported:
http://ProxyServer:Port
root/Network/Hostname
Sets the hostname of the thin client.
root/Network/HttpProxy
Sets the HTTP proxy address. HP recommends using the following
format: http://ProxyServer:Port
root/Network/HttpsProxy
Sets the HTTPS proxy address. HP recommends using the
following format for this value because the http prex is better
supported: http://ProxyServer:Port
root/Network/IPSec/IPSecRules/<UUID>/DstAddr
Sets the destination address for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethod
Sets the authentication method for the IPSec rule. PSK is for
using a pre-shared key, and Certificate is for using
certicate les.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodCACert
If the authentication method is Certificate, the CA certicate
le path is saved in this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodClientCert
If the authentication method is Certificate, the client
certicate le path is saved in this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodPresharedKey
If the authentication method is PSK, the pre-shared key value is
saved in this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMAuthMethodPrivateKey
If the authentication method is Certificate, the private key
le path that corresponds with the client certicate is saved in
this registry key.
root/Network/IPSec/IPSecRules/<UUID>/
MMDHGroup
Sets the phase 1 Diie-Hellman group.
root/Network/IPSec/IPSecRules/<UUID>/
MMEncryptionAlg
Sets the phase 1 encryption algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
MMIntegrityAlg
Sets the phase 1 integrity algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
MMLifetimeMinutes
Sets the phase 1 lifetime.
root/Network/IPSec/IPSecRules/<UUID>/
QMAHEnable
Enables phase 2 AH.
root/Network/IPSec/IPSecRules/<UUID>/
QMAHIntegrityAlg
Sets the phase 2 AH integrity algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
QMESPEnable
Enables phase 2 ESP.
root/Network/IPSec/IPSecRules/<UUID>/
QMESPEncryptionAlg
Sets the phase 2 ESP encryption algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
QMESPIntegrityAlg
Sets the phase 2 ESP integrity algorithm.
root/Network/IPSec/IPSecRules/<UUID>/
QMLifetimeSeconds
Sets the phase 2 lifetime.
root/Network/IPSec/IPSecRules/<UUID>/
RuleDescription
Sets the description for the IPSec rule.
Network 125