HP ThinPro 6.1 - Administrator Guide

Registry key Description
root/Network/IPSec/IPSecRules/<UUID>/
RuleEnable
If set to 1, the rule is enabled.
root/Network/IPSec/IPSecRules/<UUID>/RuleName
Sets the name for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/SrcAddr
Sets the source address for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
TunnelDstAddr
Sets the tunnel destination address for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
TunnelEnable
Enables tunnel mode for the IPSec rule.
root/Network/IPSec/IPSecRules/<UUID>/
TunnelSrcAddr
Sets the tunnel source address for the IPSec rule.
root/Network/KeepPreviousDNS
If set to 1, previously-congured DNS servers and search domains
not generated by the Network Manager will be kept in resolv.conf.
If set to 0, resolv.conf will be overwritten completely.
root/Network/SearchDomains
Additional search domains for FQDN resolution can be specied
here. The specied domains will be appended to any incomplete
server denitions in an attempt to generate an FQDN that can be
resolved via DNS. For example, a search domain of
mydomain.com will allow the server denition myserver to
resolve properly to myserver.mydomain.com, even if the
DNS server does not have myserver in its name resolution
tables. Up to ve additional search domains can be specied.
root/Network/VPN/AutoStart
If set to 1, VPN starts automatically when the system starts up.
root/Network/VPN/PPTP/Domain
Sets the PPTP domain.
root/Network/VPN/PPTP/Gateway
Sets the PPTP gateway.
root/Network/VPN/PPTP/Password
Sets the PPTP user password.
root/Network/VPN/PPTP/Username
Sets the PPTP username.
root/Network/VPN/Type
Sets the VPN type.
root/Network/VPN/VPNC/Domain
Sets the VPNC domain.
root/Network/VPN/VPNC/Gateway
Sets the VPNC gateway.
root/Network/VPN/VPNC/Group
Sets the VPNC group.
root/Network/VPN/VPNC/GroupPassword
Sets the VPNC group password.
root/Network/VPN/VPNC/IKEDHGroup
Sets the VPNC IKE Diie-Hellman group.
root/Network/VPN/VPNC/LocalUDPPort
Sets the local UDP port to use for VPNC. If set to 0, a random port
will be used. This setting is valid only when the NAT traversal
mode (NATTMode) is cisco-udp.
root/Network/VPN/VPNC/NATTMode
Sets the VPNC NAT traversal mode.
root/Network/VPN/VPNC/Password
Sets the VPNC user password.
root/Network/VPN/VPNC/PerfectForwardSecrecy
Sets the VPNC Diie-Hellman group to use for Perfect Forward
Secrecy (PFS).
root/Network/VPN/VPNC/Security
Sets the VPNC security level.
root/Network/VPN/VPNC/Username
Sets the VPNC username.
126 Appendix D Registry keys