HP ThinPro 6.1 - Administrator Guide

Registry key Description
root/Network/Wireless/WpaDriver
Species the driver used by wpa_supplicant (wext by default).
nl80211 is the only other driver that is currently supported.
root/Network/Wireless/bcmwlCountryOverride
Overrides the country value from the BIOS in case the BIOS does
not have the necessary value. The bcmwl driver accepts the
wl_country option, which is retrieved from BIOS values on an as-
needed basis (only Indonesia is supported currently). A system
restart is required for any changes to take eect.
root/Network/disableLeftClickMenu
If set to 1, the left-click menu for the network system tray icon is
disabled.
root/Network/disableRightClickMenu
If set to 1, the right-click menu for the network system tray icon is
disabled.
root/Network/iPeak/ShowStatus
If set to 1, the HP Velocity status is displayed as part of the
system tray icon. HP Velocity is not supported on the HP t420.
root/Network/iPeak/Status
If set to 1, HP Velocity is enabled. If set to 2, HP Velocity is
enabled in Monitor mode. If set to 0, HP Velocity is disabled. HP
Velocity is not supported on the HP t420.
root/Network/userLock
If set to 1, and if the network settings have been modied by the
user, the network settings are preserved when importing a client
prole.
root/Network/userLockEngaged
This registry key is set to 1 automatically after the network
settings have been modied by the user. You normally do not
need to modify this setting.
SCIM
Registry key Description
root/SCIM/ScimEnabled
If set to 1, SCIM is enabled for Chinese, Japanese, and Korean
input.
ScepMgr
Registry key Description
root/ScepMgr/General/AutoRenew/Enabled
If set to 1, certicates will be renewed automatically before they
expire.
root/ScepMgr/General/AutoRenew/TimeFrame
Sets the number of days before a certicate's expiration date that
the SCEP Manager will try to renew the certicate automatically.
root/ScepMgr/IdentifyingInfo/CommonName
Sets the common name to use for SCEP identifying information,
such as your name or the Fully-Qualied Domain Name (FQDN) of
the device. The FQDN is used by default if this value is left empty.
root/ScepMgr/IdentifyingInfo/CountryName
Sets the country or region to use for SCEP identifying information.
root/ScepMgr/IdentifyingInfo/EmailAddress
Sets the email address to use for SCEP identifying information.
root/ScepMgr/IdentifyingInfo/LocalityName
Sets the locality name to use for SCEP identifying information,
such as a city name.
SCIM 129