HP ThinPro 6.1 - Administrator Guide

Registry key Description
root/SystemInfo/Pages/NetTools
If set to 0, the Net Tools tab of the System Information window is
hidden from end users.
root/SystemInfo/Pages/Network
If set to 0, the Network tab of the System Information window is
hidden from end users.
root/SystemInfo/Pages/SoftwareInformationTab/
ServicePacks
If set to 0, the Service Packs tab in the Software Information
section of the System Information window is hidden from end
users.
root/SystemInfo/Pages/SoftwareInformationTab/
SoftwareInformation
If set to 0, the Software Information tab of the System
Information window is hidden from end users.
root/SystemInfo/Pages/SoftwareInformationTab/
SoftwareInstalled
If set to 0, the Software Installed tab in the Software
Information section of the System Information window is hidden
from end users.
root/SystemInfo/Pages/SystemLogs
If set to 0, the System Logs tab of the System Information
window is hidden from end users.
root/SystemInfo/authorized
If set to 0, the System Information button on the taskbar is
disabled for end users.
TaskMgr
Registry key Description
root/TaskMgr/General/AlwaysOnTop
If set to 1, the Task Manager window is always on top.
USB
Registry key Description
root/USB/Classes/<ClassType>/ClassID
Sets the USB class ID number.
root/USB/Classes/<ClassType>/DisplayName
Sets the USB class name.
root/USB/Classes/<ClassType>/State
Sets whether the class is mapped to the remote host.
root/USB/Classes/<ClassType>/Visible
Sets whether the class is shown in the UI, not shown in the UI, or
disabled.
root/USB/Classes/ShowTab
If set to 1, the Classes section is shown in USB Manager.
root/USB/Devices/<UUID>/DisplayName
Sets the name to show in USB Manager. If not supplied, USB
Manager will attempt to generate an appropriate name using
device information.
root/USB/Devices/<UUID>/ProductID
Sets the product ID of the device.
root/USB/Devices/<UUID>/State
Sets whether this device is mapped to the remote host as follows:
0=Do Not Redirect; 1=Use Defaults; 2=Redirect.
root/USB/Devices/<UUID>/VendorID
Sets the vendor ID of the device.
root/USB/root/autoSwitchProtocol
If set to 1, the remote USB protocol will switch automatically
based on which protocol is chosen.
132 Appendix D Registry keys