HP ThinPro 6.1 - Administrator Guide

Registry key Description
root/USB/root/mass-storage/allowed
If set to 1, mass storage devices will be mounted automatically
when the protocol is local.
root/USB/root/mass-storage/read-only
If set to 1, when mass storage devices are mounted automatically,
they will be mounted as read-only.
root/USB/root/opendebug
If set to 1, a debug message will be written to /tmp/USB-mgr-
log.
root/USB/root/protocol
Sets which protocol owns remote USB. Valid values depend on
which protocols are installed on the system but can include
local, xen, freerdp, and view.
auto-update
Registry key Description
root/auto-update/DNSAliasDir
Sets the default root directory for DNS alias mode on the server
hosting HP Smart Client Services.
root/auto-update/ManualUpdate
If set to 1, the DHCP tag, DNS alias, and broadcast update
methods for Automatic Update are disabled. When performing a
manual update, the password, path, protocol, user, and
ServerURL registry keys must be set to ensure the update
server is known.
root/auto-update/ScheduledScan/Enabled
If set to 1, the thin client performs periodic scans of the
Automatic Update server to check for updates. If set to 0, the thin
client will only check for updates at system startup.
root/auto-update/ScheduledScan/Interval
Sets the amount of time to wait between scheduled update scans.
This should be specied in the HH:MM format. Intervals longer
than 24 hours can be specied. For example, to have the scans
occur every 48 hours, set this to 48:00.
root/auto-update/ScheduledScan/Period
Thin clients will randomly activate their scheduled scan
throughout the dened period. Using a long period avoids cases
where all thin clients update at exactly the same, which could
cause network congestion. The period should be specied in the
HH:MM format. For example, to spread thin client updates over a
2.5-hour period, set this to 02:30.
root/auto-update/ScheduledScan/StartTime
Sets the start time of the rst scheduled update scan period in the
format HH:MM, using the 24-hour time format. For example, 4:35
p.m. would be 16:35.
root/auto-update/ServerURL
Sets the IP address or domain name of the update server used
when ManualUpdate is enabled.
root/auto-update/VisibleInSystray
If set to 1, the Automatic Update system tray icon is enabled.
root/auto-update/enableOnBootup
If set to 1, Automatic Update is enabled at system startup.
root/auto-update/enableSystrayLeftClickMenu
If set to 1, the left-click menu for the Automatic Update system
tray icon is enabled.
root/auto-update/enableSystrayRightClickMenu
If set to 1, the right-click menu for the Automatic Update system
tray icon is enabled.
auto-update 133