HP ThinPro 6.1 - Administrator Guide

Registry key Description
root/keyboard/VisibleInSystray
If set to 1, the keyboard system tray icon is displayed and
indicates the current keyboard layout.
root/keyboard/XkbLayout
This is an internal key used to map to an XKB keyboard layout.
This key should not need to be modied.
root/keyboard/XkbModel
This is an internal key used to map to an XKB keyboard model.
This key should not need to be modied.
root/keyboard/XkbOptions
This is an internal key used to map to XKB keyboard options. This
key should not need to be modied.
root/keyboard/XkbVariant
This is an internal key used to map to an XKB keyboard variant.
This key should not need to be modied.
root/keyboard/enable2
If set to 1, the secondary keyboard layout can be switched to via
the keyboard shortcut dened by switch.
root/keyboard/layout
Sets the primary keyboard layout.
root/keyboard/layout2
Sets the secondary keyboard layout.
root/keyboard/model
Sets the primary keyboard model.
root/keyboard/model2
Sets the secondary keyboard model.
root/keyboard/numlock
If set to 1, the Num Lock function is enabled at system startup.
root/keyboard/rdp_kb
This is an internal key used to map to an RDP keyboard map. This
key should not need to be modied.
root/keyboard/switch
Sets the keyboard shortcut for switching between the rst and
second keyboard layout (enable2 must also be set to 1). Valid
values are as follows: grp:ctrl_shift_toggle,
grp:ctrl_alt_toggle, grp:alt_shift_toggle.
root/keyboard/variant
Sets the primary keyboard variant.
root/keyboard/variant2
Sets the secondary keyboard variant.
logging
Registry key Description
root/logging/general/debug
If set to 1, debugging is enabled for all debug-supported
subsystems. This is usually used in conjunction with
generateDiagnostic.sh or the System Information
Diagnostic tool to generate a diagnostic bundle with system
debug logs included.
root/logging/general/debugLevel
Sets the debug level. This value will be leveraged by other
modules to generate the corresponding logs.
root/logging/general/showDebugLevelBox
If set to 1, the Debug level option on the System Logs tab of the
System Information window will be available to end users. If set
to 0, the option is available to administrators only.
logging 137