HP ThinPro 6.1 - Administrator Guide

Registry key Description
root/screensaver/origImageCopyPath
This is the path where the custom image is saved when mode is
set to Default.
root/screensaver/standby
Sets the timeout delay in minutes before the monitor goes into
standby mode.
root/screensaver/suspend
Sets the timeout delay in minutes before the monitor goes into
suspend mode.
root/screensaver/timeoutScreensaver
Sets the timeout delay in minutes before the screen saver starts.
root/screensaver/timeoutSleep
Sets the timeout delay in minutes before the thin client goes into
sleep mode.
security
Registry key Description
root/security/mustLogin
If set to 1, all users are forced to log in before accessing the
desktop.
sshd
Registry key Description
root/sshd/enabled
If set to 1, the SSH daemon is enabled and the thin client can be
accessed via SSH.
root/sshd/userAccess
If set to 1, end users can connect to the thin client via SSH.
time
Registry key Description
root/time/NTPServers
Species NTP servers to use via a comma-separated list. Private
NTP servers or large virtual NTP clusters such as
pool.ntp.org are the best choices to minimize server load.
Clear this value to return to using DHCP servers (tag 42) instead of
a xed list.
root/time/TimeServerIPAddress
Sets the time server used by the Linux net command. These
servers are typically the domain controller servers on the
corporate network. This should be used when NTP servers are not
congured or they are not responding. The Linux net command
identies this server on its own. However, specic server IP
addresses can be provided here if desired.
root/time/WebServerURL
Sets the web server URL (such as hp.com) to use when fetching
the time using the http protocol. This URL can be within an
intranet or over the Internet.
root/time/timezone
Sets the time zone. Time zones should be specied as dened by
Linux Timezone in the Date and Time tool in Control Panel, and
they should be in the following format: Region/Subregion.
security 139