HP ThinPro 6.1 - Administrator Guide

Registry key Description
root/vncserver/coreSettings/
vncNotifyShowTimeout
If set to 1, a timeout is applied to the notication dialog that is
shown to the user when someone is attempting to connect to the
thin client using VNC.
root/vncserver/coreSettings/vncNotifyTimeout
Sets the timeout in seconds for the notication dialog that is
shown to the user when someone is attempting to connect to the
thin client using VNC.
root/vncserver/coreSettings/vncNotifyUser
If set to 1, a notication is shown to the user when someone is
attempting to connect to the thin client using VNC.
root/vncserver/coreSettings/vncPassword
Sets the password for VNC shadowing. The key
vncUsePassword must also be enabled.
root/vncserver/coreSettings/vncReadOnly
If set to 1, VNC shadowing will operate in view-only mode.
root/vncserver/coreSettings/
vncRefuseInDefault
If set to 1, VNC requests are refused automatically if the user does
not interact with the notication dialog before the timeout.
root/vncserver/coreSettings/
vncTakeEffectRightNow
If set to 1, VNC settings take eect immediately after being
modied.
root/vncserver/coreSettings/vncUsePassword
If set to 1, the password specied in vncPassword is required
for VNC shadowing.
root/vncserver/coreSettings/vncUseSSL
If set to 1, SSL is used for VNC connections.
root/vncserver/gui/VNCShadowManager/name
This registry key is either used internally or reserved for future
use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/status
This registry key is either used internally or reserved for future
use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/title
This registry key is either used internally or reserved for future
use. The value should not be changed.
root/vncserver/gui/VNCShadowManager/widgets/
enableVncShadow
Controls the state of the Enable VNC Shadow widget in the VNC
Shadow tool. If set to active, the widget is visible in the UI and
the user can interact with it. If set to inactive, the widget is
hidden. If set to read-only, the widget is visible in the read-
only state.
root/vncserver/gui/VNCShadowManager/widgets/
userNotificationMessage
Controls the state of the User Notication Message widget in the
VNC Shadow tool. If set to active, the widget is visible in the UI
and the user can interact with it. If set to inactive, the widget
is hidden. If set to read-only, the widget is visible in the read-
only state.
root/vncserver/gui/VNCShadowManager/widgets/
vncNotifyShowTimeout
Controls the state of the VNC Show Timeout for Notication
widget in the VNC Shadow tool. If set to active, the widget is
visible in the UI and the user can interact with it. If set to
inactive, the widget is hidden. If set to read-only, the
widget is visible in the read-only state.
root/vncserver/gui/VNCShadowManager/widgets/
vncNotifyTimeout
Controls the state of the numerical widget in the VNC Shadow
tool. If set to active, the widget is visible in the UI and the user
can interact with it. If set to inactive, the widget is hidden. If
set to read-only, the widget is visible in the read-only state.
root/vncserver/gui/VNCShadowManager/widgets/
vncNotifyUser
Controls the state of the VNC Notify User to Allow Refuse widget
in the VNC Shadow tool. If set to active, the widget is visible in
the UI and the user can interact with it. If set to inactive, the
widget is hidden. If set to read-only, the widget is visible in the
read-only state.
144 Appendix D Registry keys