HP ThinPro 6.1 - Administrator Guide
Enabling HP True Graphics for multiple monitors on the HP t420
To enable HP True Graphics for multiple monitors on the HP t420:
1. Restart the thin client and press F10 to access the BIOS.
2. Navigate to Advanced > Integrated Graphics.
3. Set Integrated Graphics to Force.
4. Set UMA Frame Buer Size to 512M
After these steps are performed, the amount of memory available for graphics is expanded, and HP True
Graphics can be used for two monitors.
TIP: These settings can also be congured via HPDM or via the BIOS tools included with HP ThinPro (see
BIOS settings tool on page 69 for more information).
RDP
The RDP client is based on FreeRDP 1.1 and meets the following requirements for RDP:
●
Hardware-accelerated RemoteFX
●
MMR supported when connecting to Windows hosts with the Desktop Experience feature enabled
●
USBR supported when connecting to RDP servers that enable it
RDP general settings
The following table describes the RDP general settings.
NOTE: These settings aect all RDP connections.
Option Description
Send hostname as Species whether to send the thin client's hostname or MAC
address as the hostname specied to the remote system.
Enable Multimedia Redirection Enables multimedia redirection.
RDP per-connection settings
NOTE: These settings aect the connection you are currently conguring only.
Network
The following table describes the settings that are available under the Network category when editing an RDP
connection.
Option
Description
Name A custom name for this connection.
Address The IP address or server name for this connection, or the RD Web Access feed URL. If
required, the port can be appended to the server after a colon (by default, the port is
3389 for a direct RDP connection).
16 Chapter 4 Connection types