HP ThinPro 6.1 - Administrator Guide

CertMgr
This registry category is used internally and does not have any user-dened entries.
ConnectionManager
Registry key Description
root/ConnectionManager/customLogoPath
root/ConnectionManager/defaultConnection
To properly launch a connection on startup, this must be set to a
valid connection using the format Type:Label like in the following
example: xen:Default Connection
root/ConnectionManager/minHeight
root/ConnectionManager/minWidth
root/ConnectionManager/splashLogoPath
Sets the full path to the image displayed while a connection is
loading.
root/ConnectionManager/useKioskMode
root/ConnectionManager/
useSplashOnConnectionStartup
If set to 1, the image set by splashLogoPath is enabled. By
default, this is enabled for ThinPro and disabled for Smart Zero.
ConnectionType
custom
Registry key Description
root/ConnectionType/custom/authorizations/
user/add
If set to 1, an end user has permission to add a new connection of
this type using Connection Manager. This key has no eect on
Smart Zero.
root/ConnectionType/custom/authorizations/
user/general
If set to 1, an end user has permission to modify the general
settings for this connection type using Connection Manager. This
key has no eect on Smart Zero.
root/ConnectionType/custom/connections/
<UUID>/afterStartedCommand
Sets the command to execute after the connection has been
started.
root/ConnectionType/custom/connections/
<UUID>/afterStoppedCommand
Sets the command to execute after the connection has been
stopped.
root/ConnectionType/custom/connections/
<UUID>/authorizations/user/edit
If set to 1, an end user has permission to modify the connection
settings for this connection.
root/ConnectionType/custom/connections/
<UUID>/authorizations/user/execution
If set to 1, an end user has permission to execute this connection.
root/ConnectionType/custom/connections/
<UUID>/autoReconnect
If set to 1, the connection will be restarted when it is closed or
disconnected.
root/ConnectionType/custom/connections/
<UUID>/autoReconnectDelay
Sets the amount of time in seconds to wait before reconnecting
the session. The default of 0 will cause the connection to
reconnect immediately. This setting only takes eect when
autoReconnect is set to 1.
72 Appendix D Registry keys