HP ThinPro 6.1 - Administrator Guide

freerdp
Registry key Description
root/ConnectionType/freerdp/authorizations/
user/add
If set to 1, an end user has permission to add a new connection of
this type using Connection Manager. This key has no eect on
Smart Zero.
root/ConnectionType/freerdp/authorizations/
user/general
If set to 1, an end user has permission to modify the general
settings for this connection type using Connection Manager. This
key has no eect on Smart Zero.
root/ConnectionType/freerdp/connections/
<UUID>/ExtraArgs
Species extra arguments for the xfreerdp client. Run
xfreerdp --help from an X terminal to see all available
arguments.
root/ConnectionType/freerdp/connections/
<UUID>/SingleSignOn
root/ConnectionType/freerdp/connections/
<UUID>/address
Sets the hostname or IP address to connect to. The port number
can be appended on the end after a colon character. For example:
servername:3389
root/ConnectionType/freerdp/connections/
<UUID>/afterStoppedCommand
Sets the command to execute after the connection has been
stopped.
root/ConnectionType/freerdp/connections/
<UUID>/application
Species an alternate shell or application to run.
root/ConnectionType/freerdp/connections/
<UUID>/attachToConsole
root/ConnectionType/freerdp/connections/
<UUID>/audioLatency
Sets the average milliseconds of oset between the audio stream
and the display of corresponding video frames after decoding.
root/ConnectionType/freerdp/connections/
<UUID>/authorizations/user/edit
If set to 1, an end user has permission to modify the connection
settings for this connection.
root/ConnectionType/freerdp/connections/
<UUID>/authorizations/user/execution
If set to 1, an end user has permission to execute this connection.
root/ConnectionType/freerdp/connections/
<UUID>/autoReconnect
If set to 1, the connection will be restarted when it is closed or
disconnected.
root/ConnectionType/freerdp/connections/
<UUID>/autoReconnectDelay
Sets the amount of time in seconds to wait before reconnecting
the session. The default of 0 will cause the connection to
reconnect immediately. This setting only takes eect when
autoReconnect is set to 1.
root/ConnectionType/freerdp/connections/
<UUID>/autostart
If set to a value of 1–5, the connection will be started
automatically after the system boots, with the value of 1 having
the highest priority.
root/ConnectionType/freerdp/connections/
<UUID>/autostartDelay
Sets the amount of time in seconds to wait before starting the
connection after the system boots. The default of 0 will cause the
connection to start immediately. This setting only takes eect
when autostart is set to 1.
root/ConnectionType/freerdp/connections/
<UUID>/bandwidthLimitation
If set to a value greater than 0, the value represents an
approximate bandwidth limitation for downloading and uploading
in kilobytes per second. If set to 0 (the default), there is no
limitation.
root/ConnectionType/freerdp/connections/
<UUID>/beforeStartingCommand
Sets the command to execute before the connection starts.
80 Appendix D Registry keys