HP ThinPro 6.1 - Administrator Guide

Registry key Description
dialog is shown if verication is not passed. If set to 2,
remembered hosts are not checked and a warning dialog is shown
if verication is not passed. If set to 3, all insecure connections
are refused.
root/ConnectionType/freerdp/connections/
<UUID>/sendHostname
Sets the thin client hostname that is sent to the remote host. If
left blank, the system hostname is sent. The registry key root/
ConnectionType/freerdp/general/sendHostname
must be set to hostname for this key to be used.
root/ConnectionType/freerdp/connections/
<UUID>/showConnectionGraph
This is a diagnostic function. If set to 1, when the session starts, a
separate program will be started to graph the connection's health.
root/ConnectionType/freerdp/connections/
<UUID>/showRDPDashboard
If set to 1, when the session starts, a separate window displays
RDP performance and status.
root/ConnectionType/freerdp/connections/
<UUID>/smartcard
If set to 1, local smartcard authentication to the remote host is
allowed. Currently, this will disable Network Level Authentication
(NLA).
root/ConnectionType/freerdp/connections/
<UUID>/sound
If set to 1, the playback and recording devices are redirected to
the remote host via the Audio extension. If set to 0, the
extension is disabled. If set to 2, the USB audio devices are
redirected as congured in USB Manager. Generally, HP
recommends setting this value to 1 so that high-level audio
redirection is used. This will improve audio quality and ensure
that client audio redirected via other extensions (such as
Multimedia Redirection) matches local audio settings.
root/ConnectionType/freerdp/connections/
<UUID>/startMode
If set to the default focus and the connection is already started,
the connection will be given focus. Otherwise, an error will be
returned stating that the connection is already started.
root/ConnectionType/freerdp/connections/
<UUID>/timeoutError
Sets the number of milliseconds to wait after losing the
connection before giving up on reconnecting with the server. If set
to 0, reconnection is attempted forever.
root/ConnectionType/freerdp/connections/
<UUID>/timeoutRecovery
Sets the number of milliseconds to wait after losing the
connection for networking to recover without trying a forced
reconnect.
root/ConnectionType/freerdp/connections/
<UUID>/timeoutWarning
Sets the number of milliseconds to wait after losing the
connection before warning the user that the connection has been
lost.
root/ConnectionType/freerdp/connections/
<UUID>/timeoutWarningDialog
If set to 1, when an end-to-end connection drop is detected, a
dialog is displayed and the screen will turn grayscale. Otherwise,
messages are written to the connection log and the session
freezes.
root/ConnectionType/freerdp/connections/
<UUID>/timeoutsEnabled
If set to 1, end-to-end connection health checks are done.
root/ConnectionType/freerdp/connections/
<UUID>/tlsVersion
Sets the version of Transport Layer Security to be used during the
early stages of negotiation with the RDP server. Either set this to
match the version of TLS used by your RDP server, or try setting it
to auto.
NOTE: There are some server-side defects in some unpatched
RDP servers that can cause the auto setting to fail, so it is not the
default setting.
root/ConnectionType/freerdp/connections/
<UUID>/usbMiscRedirection
If set to 0, redirection is disabled for all other USB devices except
those handled by sound, printerMapping, portMapping,
ConnectionType 85