HP ThinPro 6.2 - Administrator Guide

Registry key Description
root/ConnectionType/freerdp/connections/
<UUID>/rdp8Codecs
If set to 1, RDP 8 codecs are used if available. This setting should
be disabled only in the case of a defect specic to RDP 8 codecs.
Disabling this setting might also disable more advanced codecs.
root/ConnectionType/freerdp/connections/
<UUID>/rdpEncryption
If set to 1, standard RDP encryption is used to encrypt all data
between the client and the server.
root/ConnectionType/freerdp/connections/
<UUID>/rdpH264Codec
If set to 1, RDP 8 H.264 codecs are used if available. This setting
has known visual errors, particularly in multi-monitor
congurations, and should be considered experimental and
unsupported. Enabling this setting simply advises the server that
the thin client supports H.264 for desktop display. The server
must also support H.264, and the server makes the nal decision
on what codecs are used. This setting aects only the desktop
codecs. It does not aect multimedia redirection codecs.
root/ConnectionType/freerdp/connections/
<UUID>/rdpProgressiveCodec
If set to 1, RDP 8 progressive codecs are used if available. This
setting should be disabled only in the case of a defect specic to
RDP 8 progressive codecs. Disabling this setting might also
disable more advanced codecs.
root/ConnectionType/freerdp/connections/
<UUID>/redirectPreference
For redirection, the RDP client is given several destination
possibilities. It normally tries them in the following order: FQDN,
Primary IP, IP List, NetBIOS. If FQDN is not desired, one of the
alternatives can be tried rst by setting this registry key. If the
specied method does not work, the RDP client falls back to the
original order. A setting of auto forces the original order.
root/ConnectionType/freerdp/connections/
<UUID>/remoteApp
Species the name of an available application to run in Remote
Application Integrated Locally (RAIL) mode.
root/ConnectionType/freerdp/connections/
<UUID>/remoteDesktopService
If set to Remote Computer, a direct RDP connection to a
remote computer is done. If set to RD Web Access, a
connection to an RD Web Access service is done
rst to retrieve a
feed of the published RemoteApp resources.
root/ConnectionType/freerdp/connections/
<UUID>/remoteFx
If set to 1, RemoteFX in the style of RDP 7.1 is used if available.
This setting is deprecated and might disappear in a future release
of HP ThinPro. This setting should be disabled only in the case of a
defect specic to RemoteFX protocol. Disabling this setting might
also disable more advanced codecs.
root/ConnectionType/freerdp/connections/
<UUID>/scCertificate
If a precongured smart card login is selected, this gives an
identier corresponding to the certicate on that smart card to be
used for authentication.
root/ConnectionType/freerdp/connections/
<UUID>/scPin
If a precongured smart card login is selected, this gives the PIN
or password for that smart card.
root/ConnectionType/freerdp/connections/
<UUID>/seamlessWindow
If set to 1, window decorations are disabled. This can be desirable
in a multi-monitor conguration to allow the connection to be set
to the size of the primary monitor.
root/ConnectionType/freerdp/connections/
<UUID>/securityLevel
Sets the certicate security level. If set to 0, all connections are
allowed. If set to 1, remembered hosts are selected and a warning
dialog is shown if verication is not passed. If set to 2,
remembered hosts are not selected and a warning dialog is shown
if verication is not passed. If set to 3, all insecure connections
are refused.
root/ConnectionType/freerdp/connections/
<UUID>/sendHostname
Sets the thin client hostname that is sent to the remote host. If
left blank, the system hostname is sent. The registry key root/
ConnectionType/freerdp/general/sendHostname
must be set to hostname for this key to be used.
ConnectionType 91