HP ThinPro 6.2 - Administrator Guide

Registry key Description
root/ConnectionType/freerdp/general/
preferredAudio
Sets the default audio backend for high-level audio redirection
(both in and out).
root/ConnectionType/freerdp/general/
rdWebFeedUrlPattern
Sets the pattern used to build the RD Web Access URL. The host of
the URL, e.g. myserver.com, is replaced by the value of the
connection's Address eld. This pattern is not used when the
address is already a URL.
root/ConnectionType/freerdp/general/
sendHostname
If set to hostname, the system hostname is sent to the remote
host. This is typically used to identify the thin client associated
with a particular RDP session. The sent hostname can be
overridden using sendHostname in the connection-specic
settings. If set to mac, the MAC address of the rst available
network adapter is sent instead of the hostname.
root/ConnectionType/freerdp/general/
serialPortsDriver
This setting ensures a better compatibility with the expected
underlying Windows driver SerCx2.sys, SerCx.sys, or Serial.sys.
root/ConnectionType/freerdp/general/
serialPortsPermissive
If set to 1, errors for unsupported features will be ignored.
ssh
Registry key Description
root/ConnectionType/ssh/authorizations/
user/add
If set to 1, an end user has permission to add a new connection of
this type using Connection Manager. This key has no eect on
Smart Zero.
root/ConnectionType/ssh/authorizations/user/
general
If set to 1, an end user has permission to modify the general
settings for this connection type using Connection Manager. This
key has no eect on Smart Zero.
root/ConnectionType/ssh/connections/<UUID>/
address
Sets the hostname or IP address to connect to.
root/ConnectionType/ssh/connections/<UUID>/
afterStartedCommand
Sets the command to execute after the connection has been
started.
root/ConnectionType/ssh/connections/<UUID>/
afterStoppedCommand
Sets the command to execute after the connection has been
stopped.
root/ConnectionType/ssh/connections/<UUID>/
application
Species the application to run.
root/ConnectionType/ssh/connections/<UUID>/
authorizations/user/edit
If set to 1, an end user has permission to modify the connection
settings for this connection.
root/ConnectionType/ssh/connections/<UUID>/
authorizations/user/execution
If set to 1, an end user has permission to execute this connection.
root/ConnectionType/ssh/connections/<UUID>/
autoReconnect
If set to 1, the connection will be restarted when it is closed or
disconnected.
root/ConnectionType/ssh/connections/<UUID>/
autoReconnectDelay
Sets the amount of time in seconds to wait before reconnecting
the session. The default of 0 will cause the connection to
reconnect immediately. This setting only takes eect when
autoReconnect is set to 1.
root/ConnectionType/ssh/connections/<UUID>/
autostart
If set to a value of 1–5, the connection will be started
automatically after the system boots, with the value of 1 having
the highest priority.
ConnectionType 95